请注意:本出版物的格式为活页本。如果您想在订单中添加活页夹，请阅读本页。第八节-第2部分包含压力容器的设计、材料、制造、检查、检验、测试、超压保护和认证的强制性要求、具体禁令和非强制性指南。在本部分的范围内，压力容器是用于容纳内部或外部压力的容器。该压力可以从外部源获得，或者通过作为过程的结果从直接或间接源施加热量来获得，或其任何组合。内部或外部设计压力不超过103千帕（15磅/平方英寸）的容器和公共元件设计压力不大于103千帕的多室容器在制定本部分规则时未被考虑，也不在范围内。 仔细应用本节将有助于用户遵守其管辖范围内的适用法规，同时从这些卷中详细介绍的许多行业最佳实践中获得运营、成本和安全效益。

Please note: the format of this publication is loose-leaf. Pleasevisit this pageif you would like to add a binder to your order.Section VIII - Division 2 contains mandatory requirements, specific prohibitions, and nonmandatory guidance for the design, materials, fabrication, examination, inspection, testing, overpressure protection, and certification of pressure vessels.In the scope of this Division, pressure vessels are containers for the containment of pressure, either internal or external. This pressure may be obtained from an external source or by the application of heat from a direct or indirect source as a result of a process, or any combination thereof.Vessels with an internal or external design pressure not exceeding 103 kPa (15 psi) and multichambered vessels of which the design pressure on the common elements does not exceed 103 kPa (15 psi) were not considered when the rules of this Division were developed and are not considered within the scope.Careful application of this Section will help users to comply with applicable regulations within their jurisdictions, while achieving the operational, cost and safety benefits to be gained from the many industry best-practices detailed within these volumes.