请注意:此版本的所有临时修订版将在您购买时提供。BoatsUL 1426Scope1电缆。1这些要求包括船用电缆。电缆拟用于海上游乐船，由一根不带护套的绝缘导线或两根或两根以上带或不带整体非金属护套的绝缘导线组成。每条船用电缆的额定值如下:600 V；60°C（140°F）、75°C（167°F）或90°C（194°F）湿；以及60摄氏度（140华氏度）、75摄氏度（167华氏度）、90摄氏度（194华氏度）或105摄氏度（221华氏度）的干燥温度。可对额定温度为125°C（257°F）或200°C（392°F）的船用电缆进行调查。如此标记的船用电缆具有绝缘层（如果使用了护套，则包括护套），适用于暴露在60°C（140°F）和更低温度下的油中。船用电缆采用18英寸的绞合铜导线- 多导体为4/0 AWG，单导体为16-4/0 AWG。1.2船用电缆的载流量应符合美国海岸警卫队条例第一章第33篇，CFR第183.430和183.435部分的规定。

Please note: All interim revisions for this edition available at time of your purchase will be included.Electrical Cables for BoatsUL 1426Scope1.1 These requirements cover electrical cables for boats. The cables are intended for use in marine pleasure craft and consist of a single insulated conductor without a jacket or of two or more insulated conductors with or without an overall nonmetallic jacket. Each boat cable is rated as follows: 600 V; 60°C (140°F), 75°C (167°F), or 90°C (194°F) wet; and 60°C (140°F), 75°C (167°F), 90°C (194°F), or 105°C (221°F) dry. Boat cable dry-rated 125°C (257°F) or 200°C (392°F) may be investigated. A boat cable so marked has insulation (and jacket if a jacket is used) that is for use where exposed to oil at 60°C (140°F) and lower temperatures. Boat cables employ stranded copper conductors that are 18 - 4/0 AWG for multiple conductors and 16 - 4/0 AWG for single conductors.1.2 The ampacity of a boat cable shall be as stated in the US Coast Guard regulations Title 33, Chapter I, Parts 183.430 and 183.435 of the CFR.