DIN 13-25-ISO通用米制螺纹.第25部分:具有优选公差等级的细牙螺纹的尺寸限制；公称直径182毫米至250毫米-国家数字标准馆

现行 DIN 13-25

到馆提醒

收藏跟踪

购买正版

ISO general purpose metric screw threads - Part 25: Limits of sizes for fine pitch threads with the prefered tolerance classes; Nominal diameter from 182 mm to 250 mm ISO通用米制螺纹.第25部分:具有优选公差等级的细牙螺纹的尺寸限制；公称直径182毫米至250毫米

发布日期： 2005-08-01

分类信息

发布单位或类别：德国-德国标准化学会

关联关系

研制信息

相似标准/计划/法规

BS ISO 965-2-1998+A1-2021

ISO general purpose metric screw threads. Tolerances-Limits of sizes for general purpose external and internal screw threads. Medium quality
ISO通用公制螺纹公差

ISO general purpose metric screw threads. Tolerances. Limits of sizes for general purpose external and internal screw threads. Medium quality.
ISO通用公制螺纹公差通用外螺纹和内螺纹的尺寸限制中等质量

JIS B 0209-2-2001

ISO general purpose metric screw threads -- Tolerances -- Part 2: Limits of sizes for general purpose external and internal screw threads -- Medium quality
ISO通用公制螺纹公差第2部分:通用外螺纹和内螺纹尺寸限值中等质量

ISO general purpose metric screw threads — Tolerances — Part 3: Limit deviations for screw threads
ISO通用米制螺纹.公差.第3部分:螺纹的极限偏差

ISO general purpose metric screw threads - Tolerances - Part 2: Limits of sizes for general purpose external and internal screw threads - Medium quality (ISO 965-2:1998)
ISO通用公制螺纹-公差-第2部分:通用外螺纹和内螺纹的尺寸限制；中等质量（ISO 965-2-1998）

JIS B 0205-3-2001

ISO general purpose metric screw threads -- Part 3: Selected sizes for screws, bolts and nuts
ISO通用公制螺纹第3部分:螺钉、螺栓和螺母的选择尺寸

ISO general purpose metric screw threads - Part 22: Limits of sizes for fine pitch threads with the prefered tolerance classes; Nominal diameter from 25 mm to 52 mm
ISO通用米制螺纹.第22部分:具有优选公差等级的细牙螺纹的尺寸限制；标称直径从25毫米到52毫米

BS ISO 965-5-1998+A1-2021

ISO general purpose metric screw threads. Tolerances-Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvanizing
ISO通用公制螺纹公差

JIS B 0209-5-2001

ISO general purpose metric screw threads -- Tolerances -- Part 5: Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvanizing
ISO通用米制螺纹公差第5部分:镀锌前最大公差位置为h的热浸镀锌外螺纹与内螺纹配合的尺寸限制

ISO general purpose metric screw threads — Tolerances — Part 5: Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvanizing
ISO通用公制螺纹——公差SPART 5:与热浸镀锌外螺纹配合的内螺纹尺寸限制镀锌前最大公差位置为h

General purpose ISO metric screw threads - Limits of size for 1 mm to 68 mm diameter coarse pitch threads with recommended tolerance classes
ISO通用米制螺纹.第9部分:4mm细牙螺纹的标称尺寸；标称直径从40毫米到300毫米

ISO general purpose metric screw threads - Tolerances - Part 5: Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvanizing (ISO 965-5:1998)
ISO通用米制螺纹公差第5部分:镀锌前最大公差位置为h的热浸镀锌外螺纹与内螺纹配合的尺寸限制

General purpose ISO metric screw threads - Part 20: Limits of size for 1 mm to 68 mm diameter coarse pitch threads with recommended tolerance classes
ISO通用米制螺纹-第20部分:具有优选公差等级的粗牙螺纹的尺寸限制；标称尺寸从1毫米到68毫米

ISO 965-5-1998/Amd 1-2021

ISO general purpose metric screw threads — Tolerances — Part 5: Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvanizing — Amendment 1
ISO通用米制螺纹.公差.第5部分:镀锌前最大公差位置为h的热浸镀锌外螺纹与内螺纹配合的尺寸限制.修改件1

ISO general purpose metric screw threads — Tolerances — Part 4: Limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing
Iso通用公制螺纹螺纹 - 公差 - 第4部分:热浸镀锌外螺纹的尺寸限制与内螺纹螺纹配合镀镍后具有公差位置H或G

JIS B 0209-4-2001

ISO general purpose metric screw threads -- Tolerances -- Part 4: Limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing
ISO通用米制螺纹公差第4部分:镀锌后与公差位置为H或G的内螺纹配合的热浸镀锌外螺纹的尺寸限制

BS ISO 965-4-2021

ISO general purpose metric screw threads. Tolerances-Limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing
ISO通用公制螺纹公差

GOST ISO 965-5-2015

Основные нормы взаимозаменяемости. Резьбы метрические ИСО общего назначения. Допуски. Предельные размеры внутренних резьб, сопрягаемых с горячеоцинкованными наружными резьбами, соответствующими до нанесения покрытия полям допусков с основными отклонениями до h включительно
互换性的基本规范 ISO通用公制螺纹公差内螺纹尺寸的限制与热镀锌外螺纹配合镀锌前最大公差位置h

ISO general purpose metric screw threads - Part 26: Limits of sizes for fine pitch threads with the prefered tolerance classes; Nominal diameter from 252 mm to 1000 mm
ISO通用米制螺纹.第26部分:具有优选公差等级的细牙螺纹的尺寸限制；标称直径从252毫米到1000毫米

ISO general purpose metric screw threads - Part 21: Limits of sizes for fine pitch threads with the prefered tolerance classes; Nominal diameter from 1 mm to 24.5 mm
ISO通用米制螺纹.第21部分:具有优选公差等级的细牙螺纹的尺寸限制；标称直径从1毫米到24.5毫米

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统