1.1 本试验方法包括使用盐酸溶液使碳酸盐发生反应，测定碳酸盐骨料中不溶残渣的百分比。 1.2 以国际单位制表示的数值应视为标准值。关于筛子，根据规范 E11 ，“以国际单位制表示的数值应视为钢丝网开口尺寸和钢丝网中使用的钢丝直径的标准值。以英寸-磅单位表示的数值应视为筛框的标准值。 “当参考筛孔尺寸时，提供替代英寸-磅名称以供参考，并将其括在括号中。 1.3 本标准的文本引用了提供解释材料的注释和脚注。这些注释和脚注（不包括表和图中的注释和脚注）不应视为本标准的要求。 1.4 本标准并非旨在解决与其使用相关的所有安全问题（如有）。本标准的用户有责任在使用前制定适当的安全和健康实践，并确定监管限制的适用性。 具体预防说明见第节 7. . 1.5 本国际标准是根据世界贸易组织技术性贸易壁垒（TBT）委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认标准化原则制定的。 ====意义和用途====== 3.1 碳酸盐骨料中非碳酸盐（不溶性）材料的数量和尺寸分布对于研究路面用石头的抛光敏感性或路面摩擦特性的人员很有意义。 此外，一些机构出于验收目的利用该测试来描述过度抛光和变得光滑的碳酸盐骨料以及不会变得光滑的碳酸盐骨料。 注1: 本标准产生的结果质量取决于执行程序的人员的能力以及所用设备的能力、校准和维护。符合规范标准的机构 D3666 通常认为能够胜任和客观的测试/采样/检查等。 本标准的用户应注意遵守规范 D3666 单独使用并不能完全确保可靠的结果。可靠的结果取决于许多因素:遵循规范的建议 D3666 或类似的可接受指南提供了评估和控制其中一些因素的方法。

1.1 This test method covers determination of the percentage of insoluble residue in carbonate aggregates using hydrochloric acid solution to react the carbonates. 1.2 The values stated in SI units are to be regarded as standard. Regarding sieves, per Specification E11 , “The values stated in SI units shall be considered standard for the dimensions of the wire cloth openings and the diameter of the wires used in the wire cloth. The values stated in inch-pound units shall be considered standard with regard to the sieve frames.” When sieve mesh sizes are referenced, the alternate inch-pound designations are provided for information purposes and enclosed in parentheses. 1.3 The text of this standard references notes and footnotes which provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific precaution statements are given in Section 7 . 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. ====== Significance And Use ====== 3.1 The amount and size distribution of noncarbonate (insoluble) material in carbonate aggregates is of interest to those conducting research on the polish susceptibility of stone used in pavements or on the friction properties of pavement surfaces. In addition, some agencies utilize the test for acceptance purposes to delineate carbonate aggregates that polish excessively and become slippery and those that will not. Note 1: The quality of the results produced by this standard are dependent upon the competence of the personnel performing the procedure and the capability, calibration, and the maintenance of the equipment used. Agencies that meet the criteria of Specification D3666 are generally considered capable of competent and objective testing/sampling/inspection, etc. Users of this standard are cautioned that compliance with Specification D3666 alone does not completely ensure reliable results. Reliable results depend on many factors: following the suggestions of Specification D3666 or similar acceptable guideline provides a means of evaluating and controlling some of those factors.