ASM SA-58-铁姆肯DM-2-铬钼钢-国家数字标准馆

现行 ASM SA-58

收藏跟踪

购买正版

TIMKEN DM-2 - Chromium Molybdenum Steel 铁姆肯DM-2-铬钼钢

发布日期： 1957-07-01

查看样本合金摘要数据表（PDF）自1952年以来，合金摘要一直是世界各地使用的金属和合金材料性能数据的主要参考。以图表、图表和表格为特色，这些表格给出了有关成分或特性、物理和机械性能、热处理和可加工性的事实和数字。DM-2是一种低碳铬钼钢，建议在高达1100华氏度的温度下使用。

View Sample Alloy Digest Data Sheet (PDF)Since 1952, Alloy Digest has been the leading reference for materials property data on metals and alloys used throughout the world. Featuring graphs, charts and tables, these sheets give facts and figures on composition or characterization, physical and mechanical properties, heat treatment, and machinability.DM-2 is a low-carbon chromium-molybdenum steel recommended for use at temperatures up to 1100 deg. F.

分类信息

发布单位或类别：国际组织-ASM国际

关联关系

研制信息

相似标准/计划/法规

BS T 78-1997+A1-2013

Specification for 2½ % nickel-chromium-molybdenum steel tubes (1390Mpa)
2%镍铬钼钢管（1390Mpa）规范

BS T 79-1997+A1-2013

Specification for 2 ½% nickel-chromium-molybdenum steel tubes (1160 MPa)
2%镍铬钼钢管（1160 MPa）规范

Specification for 3% chromium-molybdenum steel castings (620-770 N/mm²)
3%铬钼钢铸件规范（620-770 N/mm^2）

Specification for 1% chromium-molybdenum low alloy steel castings (700 N/mm²)
1%铬钼低合金钢铸件规范（700 N/mm^2）

Specification for 3% chromium-molybdenum nitriding steel castings (850-1000 N/mm²)
3%铬钼氮化钢铸件规范（850-1000 N/mm^2）

BS 2S 97-1964+A3-2015

Specification 2½ per cent nickel-chromium-molybdenum steel. (1000/1160 MPa: limiting ruling section 150 mm)
规格2%镍铬钼钢（1000/1160 MPa:限制截面150 mm）

MIL MIL-T-18165B Notice 1-Cancellation

TUBE AND PIPE, CHROMIUM-MOLYBDENUM ALLOY STEEL, SEAMLESS (S/S BY MIL-P-24691/2) (SUPERSEDING MIL-T-18165A)
无缝铬钼合金钢管（MIL-P-24691/2标准S/S）（取代MIL-T-18165A）

Part 1: Postweld Heat Treatment Cracking In Chromium-Molybdenum Steels; Part 2: Postweld Heat Treatment Cracking In High Strength Low Alloy Steels
第1部分:铬钼钢的焊后热处理裂纹；第2部分:高强度低合金钢的焊后热处理裂纹

Specification for 2 1/2% nickel-chromium-molybdenum steel billets, bars, forgings and parts (1080-1280 MPa: limiting ruling section 150 mm)
2 1/2%镍铬钼钢坯料、棒材、锻件和零件规范（1080-1280 MPa:限制截面150 mm）

Specification for low carbon 17/12 chromium-nickel-molybdenum corrosion-resisting steel tube (500 N/mm²)
低碳17/12铬镍钼耐腐蚀钢管规范（500 N/mm^2）

Specification. 2½% nickel-chromium-molybdenum steel billets, bars, forgings and parts (1230-1430 MPa: limiting ruling section 40 mm)
规格2%镍铬钼钢坯料、棒材、锻件和零件（1230-1430 MPa:极限截面40 mm）

Specification. 2½% nickel-chromium-molybdenum steel billets, bars, forgings and parts (880-1080 MPa: limiting ruling section 150 mm)
规格2%镍铬钼钢坯料、棒材、锻件和零件（880-1080 MPa:限制截面150 mm）

AWS B2.1-4-221-1999(R2009)

Wps:Chromium Molybdenum Steels, Primarily Pipe Applications (M-4/P-4, Group 1 or 2) - Gtaw (Consumable Insert Root) Followed by Shielded Metal Arcwelding of Chromium-Molybdenum Steel (M-4/P-4, Group 1 OR 2), 1/8 Through 1/2 Inch Thick, As-Welded Condition
Wps:铬钼钢主要用于管道应用（M-4/P-4 第1组或第2组）-Gtaw（自耗镶块根部）然后是铬钼钢（M-4/P-4 第1组或第2组）厚度为1/8至1/2英寸焊接状态下的保护金属电弧焊

Specification for 1½ per cent nickel-chromium-molybdenum steel (110/130 kgf/mm² (70/83 tonf/in²): limiting ruling section 70 mm (2¾ in))
1 1/2%镍铬钼钢规范（110/130 kgf/mm^2（70/83 tonf/in^2）:限制截面70 mm（2 3/4 in））

Specification for 3 per cent chromium-molybdenum-vanadium steel (vacuum remelted - air hardening) (157 kgf/mm² (100 tonf/in²): limiting ruling section 30 mm (1⅛ in))
3%铬钼钒钢（真空重熔-空气硬化）规范（157 kgf/mm^2（100 tonf/in^2）:极限截面30 mm（1 1 1/8 in））

AWS B2.1-4-218-1999(R2009)

Standard Welding Procedure Specification (SWPS) forShielded Metal Arc Welding of Chromium-Molybdenum Steel (M-4/P-4, Group 1 or 2), E8018-B2, 1/8 through 1/2 in. Thick, As-Welded Condition; 1/8 through 1-1/2 in. Thick,PWHT Condition, Primarily Pipe Applications
铬钼钢（M-4/P-4 第1组或第2组）屏蔽金属电弧焊的标准焊接工艺规范（SWPS） E8018-B2 1/8至1/2英寸厚如焊接状态；1/8至1-1/2英寸厚焊后热处理条件主要用于管道应用

AWS B2.1-5A-223-1999(R2009)

Standard Welding Procedure Specification (SWPS) for Shielded Metal Arc Welding of Chromium-Molybdenum Steel (M-5A/P-5A), E9018-B3, 1/8 through 1/2 in. Thick, As-Welded Condition; 1/8 through 1-1/2 in. Thick, PWHT Condition, Primarily Pipe Applications
铬钼钢（M-5A/P-5A）的保护金属极电弧焊标准焊接工艺规范（SWPS） E9018-B3 1/8至1/2英寸厚如焊接状态；1/8至1-1/2英寸厚焊后热处理条件主要用于管道应用

AWS B2.1-4-220-1999(R2009)

Gas Tungsten Arc Welding (Consumable Insert Root) of Chromium-Molybdenum Steel (M-4/P-4, Group 1 or 2), E8018-B2, 1/8 through 1/2 in. Thick, As-Welded Condition, 1/8 through 3/4 in. Thick, PWHT Condition, IN515 and ER80S-B2, Primarily Pipe Applications
铬钼钢（M-4/P-4 第1组或第2组） E8018-B2 1/8至1/2英寸的钨极气体保护焊（自耗镶块根部）厚度焊接状态 1/8至3/4英寸厚度焊后热处理条件 IN515和ER80S-B2 主要用于管道应用

AWS B2.1-4-217-1999(R2009)

Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding of Chromium- Molybdenum Steel (M-4/P-4, Group 1 or 2), ER80S-B2, 1/8 through 1/2 in. Thick, As-Welded Condition, 1/8 through 3/4 in. Thick, PWHT Condition, Primarily Pipe Applications
ER80S-B2 1/8至1/2英寸铬钼钢（M-4/P-4 1或2组）的钨极气体保护焊标准焊接工艺规范（WPS）厚度焊接状态 1/8至3/4英寸厚焊后热处理条件主要用于管道应用

AWS B2.1-4-219-1999(R2009)

Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding followed by Shielded Metal Arc Welding of Chromium-Molybdenum Steel (M-4/P-4, Group 1 or 2), 1/8 through 1/2 in. Thick, As-Welded Condition, As-Welded Condition, 1/8 through 1-1/2 in. Thick, PWHT Condition, ER80S-B2 and E801
1/8至1/2英寸铬钼钢（M-4/P-4 第1组或第2组）的气体保护钨极电弧焊后的标准焊接工艺规范（WPS）厚度焊接状态焊接状态 1/8至1-1/2英寸厚度焊后热处理条件 ER80S-B2和E801

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统