1.1本试验方法测定了含有水硬性水泥和级配标准砂的砂浆棒在干燥时的长度变化。 1.2以国际单位制表示的数值应视为标准。括号中给出的值仅供参考。 本标准并非旨在解决与其使用相关的所有安全问题（如有）。本标准的用户有责任在使用前制定适当的安全和健康实践，并确定监管限制的适用性。 ( 警告 - 新鲜的水硬性胶结混合物具有腐蚀性，长时间接触可能会导致皮肤和组织化学烧伤）。 ====意义和用途====== 本试验方法建立了一组选定的环境温度、相对湿度和蒸发率条件，在规定的时间段内，所述成分的砂浆试样应经受该环境的温度、相对湿度和蒸发率的影响，在此期间，其长度的变化是确定和指定的 “ 干燥收缩率 ” . 通过本试验方法测定的砂浆干燥收缩与使用相同水泥制成并暴露于相同干燥条件下的混凝土的干燥收缩呈线性关系。 4. 因此，当需要开发关于水硬性水泥对由该水泥制成的混凝土的干燥收缩影响的数据时，可以使用该试验方法。

1.1 This test method determines the change in length on drying of mortar bars containing hydraulic cement and graded standard sand. 1.2 The values stated in SI units are to be regarded as the standard. Values given in parentheses are for information only. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. ( Warning - Fresh hydraulic cementitious mixtures are caustic and may cause chemical burns to skin and tissue upon prolonged exposure). ====== Significance And Use ====== This test method establishes a selected set of conditions of temperature, relative humidity and rate of evaporation of the environment to which a mortar specimen of stated composition shall be subjected for a specified period of time during which its change in length is determined and designated “ drying shrinkage ” . The drying shrinkage of mortar as determined by this test method has a linear relation to the drying shrinkage of concrete made with the same cement and exposed to the same drying conditions. 4 Hence this test method may be used when it is desired to develop data on the effect of a hydraulic cement on the drying shrinkage of concrete made with that cement.