本规程描述了用于测量基于安装在主车辆上的惯性参考系统的公路纵向表面高程剖面的测试设备的认证程序。本文规定的最低要求旨在关注施工质量控制/质量保证、验收和网络级数据收集所需的准确和可重复的剖面测量。本规程描述了用于业主机构铺路项目（其中基于轮廓的平滑度规范适用）和网络数据采集程序的惯性轮廓系统的最低性能要求。

This practice describes a certification procedure for test equipment used to measure a longitudinal surface elevation profile of highways based on an inertial reference system that is mounted on a host vehicle. The minimum requirements stipulated herein are intended to focus on the need for accurate and repeatable profile measurements for construction quality control/quality assurance, acceptance and network-level data collection.This practice describes minimum performance requirements for inertial profiling systems to be used on Owner-Agency paving projects where a profile-based smoothness specification is applicable and for network data collection programs.The filtering methods and threshold values recommended in this document were established to ensure adequate determination of the International Roughness Index (IRI) and the profile features that affect it. An Owner-Agency planning to use an index other than the IRI should filter the profile and set thresholds accordingly. In particular, replace the preprocessor filter in Step 3, Appendix X.1 with a filter that corresponds to the relevant waveband for the alternative index.This standard was formerly designated as provisional standard PP 49.