请注意:此版本的所有临时修订版将在您购买时提供。康乐船业1168Scope1。1这些要求涵盖休闲船，以及各种材料、设备和结构的安装和最终性能，包括与静态稳定性和操纵速度有关的船体性能。1.2这些要求包括受33 CFR 181-制造商要求和33 CFR 183-船舶和相关设备规定的美国海岸警卫队（USCG）法规约束的船舶，以及不受USCG法规约束的船舶。符合这些要求的船只符合适用的USCG法规。1.3这些要求补充并与NFPA 302-1998《游乐和商用摩托艇标准》结合使用；长度小于20英尺的休闲船标准，UL 1199。 1.4包含新特性、特性、组件、材料或系统的产品，或与本标准要求所涵盖的特性、特性、组件、材料或系统不同的产品，且存在火灾、触电、，应使用适当的附加组件和最终产品要求对人员受伤进行评估，以维持本标准最初预期的可接受安全水平。如果产品的特征、特性、组件、材料或系统与本标准的特定要求或规定相冲突，则无法判断其是否符合本标准。在认为合适的情况下，应根据本标准制定、修订和实施所采用的方法，提出并采用要求修订。

Please note: All interim revisions for this edition available at time of your purchase will be included.Recreational BoatsUL 1168Scope1.1 These requirements cover recreational boats, and the installation and resultant performance of various materials, equipment, and structures thereon including hull performance as it relates to static stability and maneuvering speed.1.2 These requirements cover boats that are subject to United States Coast Guard (USCG) regulations as specified in 33 CFR 181 - Manufacturer Requirements and 33 CFR 183 - Boats and Associated Equipment, as well as boats not specifically subject to USCG regulations. Boats that comply with these requirements are in accordance with the applicable USCG regulations.1.3 These requirements supplement, and are used in conjunction with, the Standard for Pleasure and Commercial Motor Craft, NFPA 302-1998; the Standard for Recreational Boats Less Than 20 Feet in Length, UL 1199.1.4 A product that contains features, characteristics, components, materials, or systems new or different from those covered by the requirements in this standard, and that involves a risk of fire, electric shock, or injury to persons shall be evaluated using the appropriate additional component and end-product requirements as determined necessary to maintain the acceptable level of safety as originally anticipated by the intent of this standard. A product whose features, characteristics, components, materials, or systems conflict with specific requirements or provisions of this standard cannot be judged to comply with this standard. Where considered appropriate, revision of requirements shall be proposed and adopted in conformance with the methods employed for development, revision, and implementation of this standard.