1.1 本指南涵盖了已被证明令人满意的程序，用于准备各种锻造金属表面进行粘合剂粘合。它没有涉及铸造金属的制备。 1.2 表面处理方法包括: 金属 第节 铝合金 7. 不锈钢 8. 碳钢 9 钛合金 10 镁合金 铜和铜合金 11 12 1.3 本文所包含的程序基于众多机构和组织的商业惯例。必要时，可以修改或补充这些方法，以包括基于经过验证的性能的方法。 1.4 用于粘合剂资格认证和质量控制测试的金属系统的表面处理应由制造商和用户共同商定。 1.5 以国际单位制表示的值应被视为标准。 括号中给出的值仅供参考。 1.6 本标准并不旨在解决与其使用相关的所有安全问题（如果有的话）。本标准的使用者有责任在使用前建立适当的安全、健康和环境实践，并确定监管限制的适用性。 1.7 本国际标准是根据世界贸易组织技术性贸易壁垒委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认的标准化原则制定的。

1.1 This guide covers procedures that have proved satisfactory for preparing various wrought metal surfaces for adhesive bonding. It does not address the preparation of cast metals. 1.2 Surface preparation methods are included for: Metal Section Aluminum Alloys 7 Stainless Steel 8 Carbon Steel 9 Titanium Alloys 10 Magnesium Alloys Copper and Copper Alloys 11 12 1.3 Procedures included herein are based on the commercial practice of numerous agencies and organizations. The methods may be revised or supplemented, as necessary, to include methods based on proven performance. 1.4 The surface preparation of metal systems used for qualification and quality control testing of the adhesive should be agreed upon by both manufacturer and user. 1.5 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.