1.1 本试验方法包括使用磁饱和感应试验仪器测定硬质合金粉末材料和烧结产品的磁饱和（Ms）。 1.2 以国际单位制表示的数值应视为标准。一个例外是使用高斯厘米 3. 每克，这是一种长期的行业惯例。 1.3 本标准并不旨在解决与其使用相关的所有安全问题（如有）。本标准的使用者有责任在使用前制定适当的安全、健康和环境实践，并确定监管限制的适用性。 1.4 本国际标准是根据世界贸易组织技术性贸易壁垒委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认的标准化原则制定的。 ====意义和用途====== 5.1 该测试方法允许对硬质合金粉末材料和烧结产品中的粘结相的磁性分数进行无损测量，并可用作材料或产品中碳含量的间接测量。 5.2 磁饱和的测量提供了材料中存在的磁性粘结剂相（即钴、镍或铁）的相对分数的比较，并可用于验收产品是否符合规范。 5.3 磁饱和的测量可以用作粉末材料质量的测量。

1.1 This test method covers the determination of magnetic saturation (Ms) of cemented carbide powder materials and sintered products using magnetic saturation induction test instrumentation. 1.2 The values stated in SI units are to be regarded as standard. An exception is the use of Gauss-cm 3 per gram, which is a longstanding industry practice. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. ====== Significance And Use ====== 5.1 This test method allows the nondestructive measurement of the magnetic fraction of the binder phase in cemented carbide powder materials and sintered product, and may be used as an indirect measure of the carbon level in the material or product. 5.2 Measurement of magnetic saturation provides a comparison of the relative fraction of magnetic binder phase, that is, cobalt, nickel, or iron, present in the material and can be used for acceptance of product to specification. 5.3 Measurement of magnetic saturation can be used as a measure of the quality of powder material.