首页 馆藏资源 舆情信息 标准服务 科研活动 关于我们
现行 ASTM D6143-23
到馆提醒
收藏跟踪
购买正版
Standard Test Method for Iron Content of Bisphenol A (4,4<emph type="bdit">′</emph > - Isopropylidenediphenol) 双酚A(4,4<emph type=“bdit”>′</emph>-亚丙基二苯酚)中铁含量的标准试验方法
发布日期: 2023-04-01
1.1 本试验方法包括双酚A(4,4 ' -异亚丙基二苯酚)。 1.2 该测试方法的检测下限为0.1 mg/kg,上限为10 mg/kg双酚A中的铁。如果铁(Fe)含量较高,则可能需要稀释样品。更长的路径长度单元也可以用于在较低的Fe水平下获得更好的精度,以及在预期范围内进行校准(例如,0 mg/kg至1 mg/kg与0 mg/kg至10 mg/kg,用于预期在0范围内的样品 mg/kg至1 mg/kg范围内。 1.3 在使用该方法确定试验结果是否符合适用规范时,应根据实践中的舍入方法对结果进行舍入 第29页 。 1.4 以国际单位制表示的数值应视为标准。 本标准中不包括其他计量单位。 1.5 本标准并非旨在解决与其使用相关的所有安全问题(如有)。本标准的使用者有责任在使用前制定适当的安全、健康和环境实践,并确定监管限制的适用性。 有关具体的危险说明,请参阅第节 9 。 1.6 本国际标准是根据世界贸易组织技术性贸易壁垒委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认的标准化原则制定的。 ====意义和用途====== 5.1 铁可能会增加双酚A的颜色,并影响末端的其他性能- 使用产品。 5.2 高纯度双酚A通常具有小于1mg/kg的铁。
1.1 This test method covers the determination of the iron content of bisphenol A (4,4 ′ -isopropylidenediphenol). 1.2 This test method has a lower detection limit of 0.1 mg/kg, and an upper limit of 10 mg/kg of iron in bisphenol A. If the iron (Fe) content is higher, it may be necessary to dilute the sample. A longer path length cell can also be used for better accuracy at lower Fe levels, as well as calibration within the range expected (for example, 0 mg/kg to 1 mg/kg versus 0 mg/kg to 10 mg/kg for samples expected to be in the 0 mg/kg to 1 mg/kg range. 1.3 In determining the conformance of the test results using this method to applicable specifications, results shall be rounded off in accordance with the rounding-off method of Practice E29 . 1.4 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limits prior to use. For a specific hazard statement, see Section 9 . 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. ====== Significance And Use ====== 5.1 Iron may increase the color of bisphenol A and affect other properties of end-use products. 5.2 High purity bisphenol A typically has less than 1 mg/kg of iron.
分类信息
关联关系
研制信息
归口单位: D16.02
相似标准/计划/法规