本文件规定了胶片的基本射线照相技术，可实现可重复的结果 以经济的方式获得。 本文件适用于加热工具、电熔合、挤压和焊接的X射线照相检查 塑料材料中的热气接头。 它适用于厚度范围从5 mm到100 mm的实心管和板中的接头。只是 适用于X射线检测时含有空气或其他气体的管道。 本文件未规定指示的验收等级。 交叉引用:EN ISO 11699-2EN 25580EN ISO 19232-1EN ISO 19232-2EN ISO 11699-1EN ISO 9712购买本文件时提供的所有当前修订版均包含在购买本文件中。

This document specifies fundamental radiographic techniques with film, which enable repeatable results to be obtained economically. This document applies to the X-ray radiographic examination of heated tool, electrofusion, extrusion and hot gas joints in plastics materials. It applies to joints in solid wall pipes and plates with a range of thicknesses from 5 mm to 100 mm. It only applies to pipes containing air or other gases at the time of X-ray testing. This document does not specify acceptance levels of the indications.Cross References:EN ISO 11699-2EN 25580EN ISO 19232-1EN ISO 19232-2EN ISO 11699-1EN ISO 9712All current amendments available at time of purchase are included with the purchase of this document.