现行

UNE 57155-1990

PAPER AND BOARD. DETERMINATION OF BENDING STIFFNESS. RESONANCE METHOD
纸和纸板 弯曲刚度的测定 共振法

1990-12-20

现行

KS M ISO 5629

종이 및 판지－휨 강성(剛性)의 측정－공명법
纸和纸板弯曲挺度的测定法(共振法)

2017-12-13

现行

KS M ISO 5629

종이 및 판지 — 휨강성의 측정 — 공명법
纸和纸板弯曲刚度的测定共振法

2023-12-22

现行

ISO 5629-2017

Paper and board — Determination of bending stiffness — Resonance method
纸和纸板 - 弯曲刚度的测定 - 共振法

2017-12-07

现行

GOST 30271-1996

Бумага и картон. Определение жесткости при изгибе. Метод резонанса
纸和纸板 弯曲刚度的测定 共振法

1996-10-03

现行

TAPPI T535

Bending Stiffness of paper and Paperboard (Resonance Length Method)
纸和纸板的弯曲刚度（共振长度法）

现行

TAPPI T535

Bending Stiffness of paper and Paperboard (Resonance Length Method)
纸和纸板的弯曲刚度（共振长度法）

现行

GOST 30435-1996

Бумага и картон. Определение жесткости при изгибе статическими методами. Общие положения
纸和纸板 通过静态方法测定弯曲刚度 一般原则

1996-10-03

现行

DIN 53123-1

Testing of paper and board - Determination of the bending stiffness - Part 1: Length of natural frequency method
纸和纸板的试验.弯曲刚度的测定.第1部分:固有频率长度法

2005-04-01

现行

GOST ISO 2493-1996

Бумага и картон. Метод определения сопротивления изгибу
纸和纸板 确定抗弯曲性的方法

1996-10-03

现行

BS ISO 5628-2019

Paper and board. Determination of bending stiffness. General principles for two-point, three-point and four-point methods
纸和纸板 弯曲刚度的测定 两点法、三点法和四点法的一般原则

2019-05-17

现行

KS M ISO 5628

종이 및 판지－휨 강성의 측정－2점, 3점 및 4점법에 대한 일반 원리
纸和纸板 - 静态法弯曲刚度的测定 - Feneral原则

2017-12-27

现行

KS M ISO 5628

종이 및 판지 — 휨강성의 측정 — 2점, 3점 및 4점법에 대한 일반 원리
纸和纸板弯曲刚度的测定两点法、三点法和四点法的一般原理

2023-12-22

现行

GB/T 23144-2023

纸和纸板 弯曲挺度的测定 两点法、三点法和四点法的通用原理
Paper and board—Determination of bending stiffness—General principles for two-point, three-point and four-point methods

2023-12-28

现行

ISO 5628-2019

Paper and board — Determination of bending stiffness — General principles for two-point, three-point and four-point methods
纸和板 - 弯曲刚度的确定 - 两点 三点和四点方法的一般原则

2019-05-14

现行

GOST 9582-1975

Бумага и картон. Метод определения жесткости при статическом изгибе
纸和纸板 静态弯曲刚度测定方法

现行

BS 10/30205404 DC

BS ISO 5628. Paper and board. Determination of bending stiffness. General principles for two-point, three-point and four-point methods
BS ISO 5628 纸和纸板 弯曲刚度的测定 两点法、三点法和四点法的一般原则

2010-06-21

现行

BS ISO 11093-6-2005

Paper and board. Testing of cores-Determination of bending strength by the three-point method
纸和纸板 岩心测试

2007-03-30

现行

ISO 11093-6-2005

Paper and board — Testing of cores — Part 6: Determination of bending strength by the three-point method
纸和纸板——CoreStart 6的测试:用三点法测定弯曲强度

2005-04-29

现行

KS M ISO 11093-6

종이 및 판지 - 지관의 시험 - 제6부 : 3점법에 의한 휨 강도의 측정
纸和纸板 - 核心测试 - 第6部分:三点法确定弯曲强度

2016-11-18