ISO 21982:2020-螺钉和螺母用装配工具.棘轮扳手.技术要求-国家数字标准馆

现行 ISO 21982:2020

到馆阅读

收藏跟踪

购买正版

Assembly tools for screws and nuts — Ratcheting wrenches — Technical requirements 螺钉和螺母用装配工具.棘轮扳手.技术要求

发布日期： 2020-07-29

本文件规定了组装或拆卸六角和双六角紧固件所用棘轮扳手的尺寸和技术要求。
注:本文件涵盖的扳手是ISO 1703中参考号1 1 01 07 0、1 1 01 08 0、1 1 01 09 0和1 1 02 19 0、1 1 1 02 20 0中确定的扳手。
注:本文件中的扳手不适用于扳手的冲击应力。

This document specifies the dimensions and technical requirements for ratcheting wrenches used in assembly or disassembly of hexagonal and double hexagonal fasteners.
NOTE The wrenches covered by this document are the ones identified in ISO 1703 under reference No.1 1 01 07 0, 1 1 01 08 0, 1 1 01 09 0 and 1 1 02 19 0, 1 1 02 20 0.
NOTE The wrenches according to this document are not intended for uses with impact stress of the wrench.

分类信息

发布单位或类别：国际组织-国际标准化组织

ICS分类： 25.140.30手持工具 - 手工工具

关联关系

研制信息

归口单位： ISO/TC 29/SC 10

相似标准/计划/法规

BS ISO 21982-2020

Assembly tools for screws and nuts. Ratcheting wrenches. Technical requirements
螺钉和螺母的装配工具棘轮扳手技术要求

Assembly tools for screws and nuts. Flare nut wrenches. Technical specifications and tests.
螺钉和螺母的装配工具喇叭螺母扳手技术规格和测试

Assembly tools for screws and nuts. Adjustable wrenches. Technical specifications and tests.
螺钉和螺母的装配工具可调扳手技术规格和测试

BS ISO 1711-1-2019

Assembly tools for screws and nuts. Technical specifications-Hand-operated wrenches and sockets
螺钉和螺母的装配工具技术规格

Assembly tools for screws and nuts. Stamping combination wrenches. Technical specifications and tests.
螺钉和螺母的装配工具冲压组合扳手技术规格和测试

Assembly tools for screws and nuts. Slugging wrench, box (ring). Technical specifications.
螺钉和螺母的装配工具弹簧扳手套筒（环）技术规格

Assembly tools for screws and nuts - Tommy bars for socket wrenches - Technical specifications
螺钉和螺母用装配工具.套筒扳手用托米杆.技术规范

Assembly tools for screws and nuts. Slugging wrenches with open end. Technical specifications.
螺钉和螺母的装配工具开口扳手技术规格

ASSEMBLY TOOLS FOR SCREWS AND NUTS. SOCKET WRENCH, SPIN TYPE. TECHNICAL SPECIFICATIONS AND TESTS.
螺钉和螺母的装配工具旋转式套筒扳手技术规格和测试

Assembly tools for screws and nuts. Socket wrenches, double end. Technical specifications and tests.
螺钉和螺母的装配工具双头套筒扳手技术规格和测试

Assembly tools for screws and nuts -- Technical specifications -- Part 1: Hand-operated wrenches and sockets
螺钉和螺母用装配工具技术条件第1部分:手动扳手和套筒

ISO 1711-1-2019

Assembly tools for screws and nuts — Technical specifications — Part 1: Hand-operated wrenches and sockets
螺丝和螺母装配工具 - 技术规格 - 第1部分:手动扳手和插座

UNE 16594-1-2001

Assembly tools for screws and nuts. Socket wrenches, double end. Part 1: Close socket wrenches. Technical specifications and tests.
螺钉和螺母的装配工具双头套筒扳手第1部分:封闭套筒扳手技术规格和测试

UNE 16594-2-2002

Assembly tools for screws and nuts. Socket wrenches, double end. Part 2: Open socket wrenches. Technical specifications and test.
螺钉和螺母的装配工具双头套筒扳手第2部分:开口套筒扳手技术规格和测试

Assembly tools for screws and nuts. Double-headed, flat and offset, box wrenches. Technical specifications and tests.
螺钉和螺母的装配工具双头平头和偏置套筒扳手技术规格和测试

Assembly tools for screws and nuts. Double-headed open-ended engineers wrenches. Technical specifications and tests.
螺钉和螺母的装配工具双头开口扳手技术规格和测试

Assembly tools for screws and nuts. Socket wrench, double end, flex head. Technical specifications and tests.
螺钉和螺母的装配工具套筒扳手双头挠性头技术规格和测试

UNE 16533-1-2006

Assembly tools for screws and nuts. Part 1: Socket wrenches for spark and glow-plugs. Technical specifications and tests
螺钉和螺母的装配工具第1部分:火花塞和电热塞用套筒扳手技术规范和测试

UNE 16533-2-2006

Assembly tools for screws and nuts. Part 2: Short socket wrenches for spak-plugs. Technical specifications and tests
螺钉和螺母的装配工具第2部分:火花塞用短套筒扳手技术规范和测试

Assembly tools for screws and nuts. Attachments for hand-operated square drive socket wrenches. Technical specifications and tests.
螺钉和螺母的装配工具手动方形驱动套筒扳手的附件技术规格和测试

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统