现行

DIN 51810-3

Testing of lubricants - Testing of rheological properties of lubricating greases - Part 3: Determination of flow point with inclining rod method
润滑剂试验润滑脂流变性能试验第3部分:用斜杆法测定流动点

2016-08-01

现行

DIN 51810-2

Testing of lubricants - Testing rheological properties of lubricating greases - Part 2: Determination of flow point using an oscillatory rheometer with a parallel-plate measuring system
润滑剂试验润滑脂流变性能试验第2部分:用带平行板测量系统的振荡流变仪测定流动点

2017-04-01

现行

GOST 9490-1975

Материалы смазочные жидкие и пластичные. Метод определения трибологических характеристик на четырехшариковой машине
Liqvid润滑和塑料材料 四球磨机润滑性能试验方法

现行

ASTM D3705-14(2019)

Standard Test Method for Misting Properties of Lubricating Fluids
润滑液雾化特性的标准试验方法

2019-12-01

现行

DIN 51347-1

Testing of lubricants - Testing under boundary lubricating conditions with the Brugger lubricant tester - Part 1: General working principles
润滑剂的试验.用Brugger润滑剂试验机在边界润滑条件下的试验.第1部分:一般工作原理

2000-01-01

现行

DIN 51347-2

Testing of lubricants - Testing under boundary lubricating conditions with the Brugger lubricant tester - Part 2: General working principles
润滑剂的试验.用Brugger润滑剂试验机在边界润滑条件下的试验.第2部分:一般工作原理

2000-01-01

现行

ASTM D1743-22

Standard Test Method for Determining Corrosion Preventive Properties of Lubricating Greases
测定润滑脂防腐性能的标准试验方法

2022-05-01

现行

GB/T 5018-2008

润滑脂防腐蚀性试验法
Standard test method for determining corrosion preventive properties of lubricating greases

2008-02-13

现行

GOST 29010-1991

Системы смазочные. Методы испытаний
润滑系统 测试方法

现行

GOST 32323-2013

Смазки пластичные. Методы испытаний
润滑脂测试方法

2013-09-27

现行

DIN 51805

Testing of lubricants; determination of flow pressure of lubricating greases, Kesternich method
润滑剂的测试；润滑脂流动压力的测定 凯斯特涅法

1974-08-01

现行

GOST 30541-1997

Системы смазочные. Нагнетатели. Общие технические требования и методы испытаний
润滑系统 润滑提供者一般技术要求和试验方法

1997-11-20

现行

SH/T 0691-2000

润滑剂的合成橡胶溶胀性测定法
Standard test method for determining the effect of lubricants on swelling property of synthetic rubbers

2000-06-05

现行

DIN 51369

Testing of cooling lubricants - Determination of the pH value of water-mixed cooling lubricants
冷却润滑剂的试验.水混合冷却润滑剂pH值的测定

2013-05-01

现行

ASTM C639-24

Standard Test Method for Rheological (Flow) Properties of Elastomeric Sealants
弹性密封胶的流变性（流动性）的标准试验方法

2024-11-01

现行

DIN 51350-5

Testing of lubricants - Testing in the four-ball tester - Part 5: Determination of wearing characteristics for consistent lubricants
润滑剂的试验.在四球试验机中的试验.第5部分:一致性润滑剂磨损特性的测定

2015-03-01

现行

HB 7056.3-2004

干膜润油剂试验方法 第3部分:干膜润滑剂附着力试验方法
Test methods of solid film lubricants-Part 3:Test method for adhesion of solid film lubricants

2004-02-16

现行

NB/SH/T 0882-2014

润滑油极压性能的测定 SRV试验机法
Standard test method for determing extreme pressure properties of lubricating oils using SRV test machine

2014-06-29

现行

FZ/T 20012-2015

纺纱油剂可洗涤性试验方法
Test method for scourability of spinning lubricant

2015-07-14

现行

GB/T 6839-2013

缝纫线润滑性试验方法
Testing method for lubrication of sewing threads

2013-11-12