IEC 60479的这一部分描述了当频率范围超过100 Hz的正弦交流电通过人体时对人体的影响。 通过人体的电流的影响有:直流分量的交流正弦波电流、相位控制的交流正弦波电流和多周期控制的交流正弦波电流 但仅适用于15 Hz至100 Hz的交流频率。 给出了将纯正弦波的适用频率扩展到150 kHz的方法，补充了IEC 60479中的数据- 1. 给出了检测随机复杂不规则波形的方法。 本文件描述了人体连续产生的正弦脉冲和多个单向脉冲放电产生的正弦脉冲。 规定值被视为适用于从0.1 ms到10 ms（含10 ms）的脉冲持续时间。 与IEC 60479一样，本文件仅考虑直接向车身施加电流源产生的传导电流- 1、它不考虑由于暴露在外部电磁场而引起的体内电流。 本基本安全出版物主要供技术委员会根据IEC指南104和ISO/IEC指南51中规定的原则编制标准时使用。它不适用于制造商或认证机构。 技术委员会的职责之一是，在适用的情况下，在编制出版物时使用基本安全出版物。 除非相关出版物中明确提及或包含，否则本基本安全出版物的要求、试验方法或试验条件不适用。交叉引用:IEC 60990ISO/IEC指南51IEC指南104IEC 60479-1:2018IEC 60050-801IEC 60050-551购买时可用的所有当前修订版均包含在本文件的购买中。

This part of IEC 60479 describes the effects on the human body when a sinusoidal alternating current in the frequency range above 100 Hz passes through it. The effects of current passing through the human body for:– alternating sinusoidal current with DC components,– alternating sinusoidal current with phase control, and– alternating sinusoidal current with multicycle control are given but are only deemed applicable for alternating current frequencies from 15 Hz up to 100 Hz. Means of extending the frequency of applicability of pure sinusoids to a frequency of 150 kHz are given, supplementing the data in IEC 60479-1. Means of examining random complex irregular waveforms are given. This document describes the effects of current passing through the human body in the form of single and multiple successive unidirectional rectangular impulses, sinusoidal impulses and impulses resulting from capacitor discharges. The values specified are deemed to be applicable for impulse durations from 0,1 ms up to and including 10 ms. This document only considers conducted current resulting from the direct application of a source of current to the body, as does IEC 60479-1. It does not consider current induced within the body caused by its exposure to an external electromagnetic field. This basic safety publication is primarily intended for use by technical committees in the preparation of standards in accordance with the principles laid down in IEC Guide 104 and ISO/IEC Guide 51. It is not intended for use by manufacturers or certification bodies. One of the responsibilities of a technical committee is, wherever applicable, to make use of basic safety publications in the preparation of its publications. The requirements, test methods or test conditions of this basic safety publication will not apply unless specifically referred to or included in the relevant publications.Cross References:IEC 60990ISO/IEC Guide 51IEC Guide 104IEC 60479-1:2018IEC 60050-801IEC 60050-551All current amendments available at time of purchase are included with the purchase of this document.