现行

GB/T 33943-2017

钢结构用高强度锚栓连接副
High-strength structural anchor bolting assemblies for steel structures

2017-07-12

现行

JGJ 82-2011

钢结构高强度螺栓连接技术规程(附条文说明)
Technical specification for high strength bolt connections of steel structures

2011-01-07

现行

GB/T 1228-2006

钢结构用高强度大六角头螺栓
High strength bolts with large hexagon head for steel structures

2006-03-27

现行

AASHTO M 164-06

Standard Specification for High-Strength Bolts for Structural Steel Joints
结构钢接头用高强度螺栓的标准规范

2005-08-01

现行

AS/NZS 1252.2-2016

High-strength steel fastener assemblies for structural engineering - Bolts, nuts and washers, Part 2: Verification testing for bolt assemblies
结构工程用高强度钢紧固件组件.螺栓 螺母和垫圈.第2部分:螺栓组件的验证试验

2016-12-23

现行

ASTM F3148-17a(2024)

Standard Specification for High Strength Structural Bolt Assemblies, Steel and Alloy Steel, Heat Treated, 144ksi Minimum Tensile Strength, Inch Dimensions
英制尺寸最小抗拉强度144ksi的热处理钢和合金钢高强度结构螺栓组件标准规范

2024-06-01

现行

AASHTO M 164M-06

Standard Specification for High-Strength Bolts for Structural Steel Joints [Metric]
结构钢接头用高强度螺栓的标准规范[米制]

2006-08-01

现行

BS EN 10210-3-2020

Hot finished steel structural hollow sections-Technical delivery conditions for high strength and weather resistant steels
热加工钢结构空心型材

2020-09-24

现行

DIN 7999

High strength hexagon fit bolts with large widths across flats for structural steel bolting
结构钢螺栓连接用大宽度对边高强度六角配合螺栓

1983-12-01

现行

DIN 6917

Square taper washers for high-strength structural bolting of steel I sections
I型钢高强度结构螺栓连接用方锥形垫圈

1989-10-01

现行

AS/NZS 1252.1-2016

High-strength steel fastener assemblies for structural engineering - Bolts, nuts and washers, Part 1: Technical requirements
结构工程用高强度钢紧固件组件.螺栓 螺母和垫圈.第1部分:技术要求

2016-12-23

现行

BS EN 10219-3-2020

Cold formed welded steel structural hollow sections-Technical delivery conditions for high strength and weather resistant steels
冷成型焊接钢结构空心型材

2020-10-08

现行

MIL MIL-S-12505B

STEEL: STRUCTURAL, HIGH-STRENGTH, LOW-ALLOY, SHAPES, PLATES, AND BARS FOR WELDED, RIVETED, AND BOLTED STRUCTURES
钢:用于焊接、铆接和螺栓连接结构的结构、高强度、低合金、型材、板材和棒材

1970-04-08

现行

DIN EN 10210-3

Hot finished steel structural hollow sections - Part 3: Technical delivery conditions for high strength and weather resistant steels
热加工钢结构空心型材.第3部分:高强度和耐候钢的交货技术条件；德文版EN 10210-3:2020

2020-11-01

现行

GB/T 3632-2008

钢结构用扭剪型高强度螺栓连接副
Sets of torshear type high strength bolt hexagon nut and plain washer for steel structures

2008-03-03

现行

DIN EN 10219-3

Cold formed welded steel structural hollow sections - Part 3: Technical delivery conditions for high strength and weather resistant steels
冷成型焊接钢结构空心型材.第3部分:高强度和耐候钢的交货技术条件

2020-11-01

现行

GB/T 1231-2006

钢结构用高强度大六角头螺栓、大六角螺母、垫圈技术条件
Specifications of high strength bolts with large hexagon head,large hexagon nuts,plain washers for steel structures

2006-03-27

现行

ASTM F3125/F3125M-23

Standard Specification for High Strength Structural Bolts and Assemblies, Steel and Alloy Steel, Heat Treated, Inch Dimensions 120 ksi and 150 ksi Minimum Tensile Strength, and Metric Dimensions 830 MPa and 1040 MPa Minimum Tensile Strength
英制尺寸120ksi和150ksi最小抗拉强度和公制尺寸830MPa和1040MPa最小抗拉强度的热处理钢和合金钢高强度结构螺栓和组件的标准规范

2023-11-01

现行

ASTM F3111-23

Standard Specification for Heavy Hex Structural Bolt/Nut/Washer Assemblies, Alloy Steel, Heat Treated, 200 ksi Minimum Tensile Strength
最小抗拉强度为200 ksi的热处理合金钢重型六角结构螺栓/螺母/垫圈组件的标准规范

2023-11-01

现行

ASTM F3043-23

Standard Specification for “Twist Off” Type Tension Control Structural Bolt/Nut/Washer Assemblies, Alloy Steel, Heat Treated, 200 ksi Minimum Tensile Strength
最小抗拉强度为200 ksi的热处理合金钢“扭转”型张力控制结构螺栓/螺母/垫圈组件的标准规范

2023-11-01