本文件规定了测量紧固件驱动工具手柄振动的实验室方法。这是一种型式试验程序，用于确定在规定负载下操作的手持式电动工具手柄上的振动值。 本文件适用于使用钉子、订书钉或销钉通过气动或其他方式驱动的紧固件驱动工具。 本文件适用于具有单顺序驱动、触点驱动、带自动反转的触点驱动或连续触点驱动的工具（见图1至图3）。 本文件不适用于以全顺序模式运行的工具，因为它们在单独启动之间的间隔要长得多。然而，为了对这种类型的不同工具进行比较（见图4和图5），附录C提供了信息指导。 注:目前的知识不允许就孤立电击和连续电击序列之间的生理和病理效应及其重复率得出任何结论。

This document specifies a laboratory method for measuring the vibration at the handle of fastener driving tools. It is a type test procedure for establishing the vibration value on the handle of a hand-held power tool operating under a specified load. This document is applicable to fastener driving tools driven pneumatically or by other means, using nails, staples or pins. This document is applicable to tools with single sequential actuation, contact actuation, contact actuation with automatic reversion or continual contact actuation (see Figures 1 to 3). This document is not applicable to tools operating in full sequential mode due to their much longer intervals in between individual actuations. However, to provide an indication for comparison of different tools of this type (see Figures 4 and 5), Annex C provides informative guidance. NOTE       Today current knowledge does not allow any conclusions regarding physiological and pathological effects between isolated shocks and continuous shock sequences, and their repetition rates.