范围:本文件规定了三种测试剥离附着力、剥离强度和拉伸搭接剪切强度的方法，以评估粘合剂粘结以及涂层上弹性粘合剂失效的类型、位置和结构。例如，这些方法用于测试总成与窗格玻璃或内置零件（如塑料盖、扰流板、仪表板盖、前照灯和汽车结构用涂层）的结合情况。本文描述的两种样本气候暴露方法是冷凝试验和巴布剂储存。 本文件未规定粘合剂和涂层的要求。 注:ISO 8510-2中描述了刚性车身结构粘合剂的剥离强度试验（方法B）。EN 1465中描述了刚性车身结构粘合剂的拉伸搭接剪切强度试验（方法C）。 刚性车身结构粘合剂的测试通常在较小的接缝厚度上进行，即<1 mm。交叉引用:ISO 17872DIN 55997ISO 10365ISO 4618ISO 6270-2ISO 3270ISO 8510-2DIN 54457EN 923:2005-01EN 1465ISO 472:2013购买本文件时提供的所有现行修订版均包含在购买本文件中。

Scope: This document specifies three methods for testing the peel adhesion, peel strength and tensile lap-shear strength in order to evaluate the adhesive bond as well as the type, location and structure of failures of elastic adhesives on coatings. These methods are used, for example, for testing the assembly with respect to the bond of panes or built-on parts, such as plastic covers, spoilers, instrument panel covers, headlights, with coatings for automobile construction. The two methods of climatic exposure of specimens described herein are the condensation test and cataplasm storage. This document does not specify requirements for adhesives and coatings. NOTE The peel strength test (method B) for rigid car body construction adhesives is described in ISO 8510-2. The tensile lap-shear strength test (method C) for rigid car body construction adhesives is described in EN 1465. Testing of rigid car body construction adhesives is generally conducted on small joint thicknesses, i.e. <1 mm.Cross References:ISO 17872DIN 55997ISO 10365ISO 4618ISO 6270-2ISO 3270ISO 8510-2DIN 54457EN 923:2005-01EN 1465ISO 472:2013All current amendments available at time of purchase are included with the purchase of this document.