1.1 本试验方法描述了一种搭接剪切试验，用于测量用于将纤维增强塑料与自身和金属连接的粘合剂的粘合特性。该方法适用于随机和纤维取向的FRP。 1.2 本试验方法旨在补充试验方法 2002年1月 并将应用扩展到纤维增强塑料（FRP）被粘物的单搭接剪切粘合接头。该试验方法可用于生成由多种FRP材料制成的接头的比较表观抗剪强度数据，为比较FRP表面处理提供了一种方法。 1.3 以英寸-磅单位表示的值应视为标准值。 括号中给出的值是对SI单位的数学转换，仅供参考，不被视为标准值。 1.4 本标准并不旨在解决与其使用相关的所有安全问题（如有）。本标准的使用者有责任在使用前建立适当的安全、健康和环境实践，并确定监管限制的适用性。 1.5 本国际标准是根据世界贸易组织技术性贸易壁垒（TBT）委员会发布的《国际标准、指南和建议制定原则决定》中确立的国际公认标准化原则制定的。 =====意义和用途====== 5.1 由于粘结而非机械紧固接头（特别是缓解应力上升和应力开裂）所具有的固有优势，粘结FRP的使用量增加，因此需要进行试验，以比较各种FRP基材和粘合剂的接头。该测试方法旨在满足这种需求。 5.2 有关重要性和用途的其他信息，请参阅指南 D4896型 .

1.1 This test method describes a lap shear test for use in measuring the bonding characteristics of adhesives for joining fiber reinforced plastics to themselves and to metals. The method is applicable to random and fiber oriented FRP. 1.2 This test method is intended to complement Test Method D1002 and extend the application to single-lap shear adhesive joints of fiber-reinforced plastic (FRP) adherends. This test method is useful for generating comparative apparent shear strength data for joints made from a number of FRP materials, providing a means by which FRP surface treatments may be compared. 1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. ====== Significance And Use ====== 5.1 Due to the increased use of adhesively-bonded FRP as a result of the inherent advantages afforded by bonded rather than mechanically-fastened joints (particularly the alleviation of stress risers and stress cracking), there is a need for tests by which joints of various FRP substrates and adhesives may be compared. This test method is intended to meet such a need. 5.2 Additional information on significance and use may be found in Guide D4896 .