法兰和对夹连接弹性密封蝶阀

2022-07-12

法兰和对夹连接弹性密封蝶阀
Flanged and wafer resilient seal butterfly valves

2008-12-23

法兰和对夹连接钢制衬氟塑料蝶阀
Liner fluoroplatics for flanged ang wafer steel butterfly valve

2011-01-14

法兰和对焊连接耐腐闸阀

2022-12-08

法兰和对焊连接耐腐闸阀

2016-01-15

High Pressure Knife Gate Valves: Iron and Ductile Iron, Lug-, Wafer-, and Flange-Type
高压刀闸阀:铸铁和球墨铸铁、凸耳型、对夹型和法兰型

Hydraulic fluid power. Flange connections with split or one-piece flange clamps and metric or inch screws-Flange connectors, ports and mounting surfaces for use at a pressure of 42 MPa (420 bar), DN 13 to DN 76
液压传动 带有分体式或整体式法兰夹和公制或英制螺钉的法兰连接

2018-03-02

Hydraulic fluid power. Flange connections with split or one-piece flange clamps and metric or inch screws-Flange connectors, ports and mounting surfaces for use at pressures of 3,5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127
液压传动 带有分体式或整体式法兰夹和公制或英制螺钉的法兰连接

2012-12-31

Steel Globe Valves - Flanged and Butt-welding Ends, Bolted Bonnets, Second Edition
钢制截止阀.法兰和对焊端 螺栓连接阀盖 第二版

2021-01-01

Hydraulic fluid power — Flange connections with split or one-piece flange clamps and metric or inch screws — Part 2: Flange connectors, ports and mounting surfaces for use at a pressure of 42 MPa (420 bar), DN 13 to DN 76
液压传动.带分体式或整体式法兰夹和米制或英寸螺钉的法兰连接件.第2部分:压力为42mpa（420bar） DN 13至DN 76的法兰连接件 端口和安装面

2018-02-22

유압 유체 동력－스플릿 또는 일체형 플랜지 클램프와 미터계 또는 인치계 나사를 가진 플랜지 연결기－제1부：3.5 MPa∼35 MPa, DN13∼DN127의 압력에서 사용하는 플랜지 연결기
液压传动带分体式或整体式法兰夹和公制或英制螺钉的法兰连接器第1部分:压力为3.5MPa至35MPa DN13至DN127的法兰连接器

2004-12-21

유압 유체 동력－스플릿 또는 일체형 플랜지 클램프와 미터계 또는 인치계 나사를 가진 플랜지 연결기－제2부：35 MPa∼40 MPa, DN 13∼DN 51의 압력에서 사용하는 플랜지 연결기
液压传动带分体式或整体式法兰夹和公制或英制螺钉的法兰连接器第2部分:压力35MPa至40MPa DN13至DN51的法兰连接器

2004-12-21

Draft Document - Hydraulic fluid power - Flange connectors with split or one-piece flange clamps and metric or inch screws - Part 2: Flange connectors for use at pressures of 35 MPa (350 bar) to 40 MPa (400 bar), DN 13 to DN 51 (ISO 6162-2:2002)
文件草稿.液压传动.带分体式或整体式法兰夹和公制或英制螺钉的法兰连接器.第2部分:在35MPa（350巴）至40MPa（400巴）压力下使用的法兰连接器 DN 13至DN 51（ISO 6162-2-2002）

2004-12-01

Draft Document - Hydraulic fluid power - Flange connectors with split or one-piece flange clamps and metric or inch screws - Part 1: Flange connectors for use at pressures of 3.5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127 (ISO 6162-1:2002)
文件草稿.液压传动.带分体式或整体式法兰夹和公制或英制螺钉的法兰连接器.第1部分:在3.5 MPa（35巴）至35 MPa（350巴）、DN 13至DN 127压力下使用的法兰连接器（ISO 6162-1-2002）

2004-12-01

Hydraulic fluid power - Flange connectors with split or one-piece flange clamps and metric or inch screws - Part 2: Flange connectors for use at pressures of 35 MPa (350) to 40 MPa (400 bar), DN 13 to DN 51 (ISO 6162-2:2002)
液压传动.带分体式或整体式法兰夹和公制或英制螺钉的法兰连接器.第2部分:在35MPa（350）至40MPa（400巴）、DN 13至DN 51压力下使用的法兰连接器（ISO 6162-2-2002）

2006-02-01

Hydraulic fluid power — Flange connections with split or one-piece flange clamps and metric or inch screws — Part 1: Flange connectors, ports and mounting surfaces for use at pressures of 3,5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127
液压流体动力——带分体式或一体式法兰夹和公制或英制螺钉的法兰连接件第1部分:压力为3.5 MPa（35 bar）至35 MPa（350 bar）、DN 13至DN 127的法兰接头、端口和安装面

2012-12-14

Hydraulic fluid power - Flange connectors with split or one-piece flange clamps and metric or inch screws - Part 1: Flange connectors for use at pressures of 3.5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127 (ISO 6162-1:2002 + Cor. 1:2004)
液压传动.带分体式或整体式法兰夹和公制或英制螺钉的法兰连接器.第1部分:在3.5MPa（35bar）至35MPa（350bar）压力下使用的法兰连接器 DN 13至DN 127（ISO 6162-1-2002+Cor.1-2004）

2006-02-01

Connectors for electronic equipment - Tests and measurements - Part 17-3: Cable clamping tests - Test 17c: Cable clamp resistance to cable pull (tensile)
电子设备连接器 - 测试和测量 - 第17-3部分:电缆夹紧测试 - 测试17C:电缆夹电缆对拉线（拉伸）

2010-06-10

BS EN 60512-17-2. Connectors for electronic equipment. Tests and measurements. Part 17-2. Cable clamping tests. Test 17b. Cable clamp resistance to cable rotation
英国标准EN 60512-17-2 电子设备用连接器 测试和测量 第17-2部分 电缆夹紧试验 测试17b 电缆夹对电缆旋转的阻力

2008-02-19