KS C 2620-2011(2021)-铜导线用压接型端子接线片-国家数字标准馆

现行 KS C 2620-2011(2021)

到馆提醒

收藏跟踪

购买正版

동선용 압착 단자 铜导线用压接型端子接线片

发布日期： 2011-12-29

该标准主要是连接用于电力用仪器内部及仪器相互布线的联动的连线或短线的电线，由KS C8323规定的连接工具或压榨端子的制造者指定的连接工具（以下简称工具）。使用，在其电线末端压紧连接的或压紧端子及绝缘体上方压紧连接的绝缘被覆部压紧端子（以下简称或压紧端子，绝缘被覆部压紧端子称为绝缘端子，二者统称端子）。规定备注本标准规定的绝缘端子是用于控制电路等布线的。

이 표준은 주로 전력용 기기 내부 및 기기 상호의 배선에 사용하는 연동의 연선 또는 단선의 전선을 접속하기 위하여 KS C 8323에 규정하는 접속 공구 또는 압착 단자의 제조자가 지정하는 접속 공구 (이하 공구라 한다.)를 사용하여, 그 전선의 끝부분에 압착 접속하는 나압착 단자 및 절연체의 위에서 압착 접속하는 절연 피복부 압착 단자(이하 나압착 단자를 나단자, 절연 피복부 압착 단자를 절연부 단자라 하고, 양자를 총칭하여 단자라 한다.)에 대하여 규정한다. 비고 이 표준에서 규정하는 절연부 단자는 제어 회로 등의 배선에 사용하는 것이다.

分类信息

发布单位或类别：韩国-韩国标准

ICS分类： 77.080.01黑色金属 - 黑色金属综合

关联关系

研制信息

相似标准/计划/法规

JIS C 2805-2010

Crimp-type terminal lugs for copper conductors
铜导线用压接式接线片

KS C 2620(2016 Confirm)

동선용 압착 단자
用于铜导体的压接式接线端子

TERMINAL LUG AND SPLICES, CONDUCTOR, CRIMP STYLE, COPPER, TERMINAL LUG, CRIMP STYLE, COPPER, UNINSULATED, RING TONGUE TYPE I, CLASS 1 FOR 150 °C TOTAL CONDUCTOR TEMPERATURE
端子接线片和接头导体压接式铜端子接线片压接型铜不绝缘环形舌片类型I 150°C导体总温度1级

Terminals, Lug: Splices, Conductor: Crimp Style, Copper, General Specification for
接线片端子:接头导体:压接式铜通用规范

TERMINALS, LUG AND SPLICES, CONDUCTOR, CRIMP STYLE, COPPER TERMINAL, LUG, CRIMP STYLE, COPPER, INSULATED, RING TONGUE, FOR THIN WALL WIRE, TYPE II CLASS 1 FOR 105 °C TOTAL CONDUCTOR TEMPERATURE
端子、接线片和接头、导体、压接式、铜端子、接线耳、压接型、铜、绝缘、环舌用于薄壁电线 II类1级导体总温度为105°C

TERMINALS, LUG AND SPLICES, CONDUCTOR, CRIMP STYLE, COPPER TERMINAL, LUG, INSULATED, RING TONGUE, BELL-MOUTHED, TYPE II, CLASS 1 (FOR 150 °C TOTAL CONDUCTOR TEMPERATURE)
1类II型喇叭口绝缘压接式铜接线端子、接线片和接头（导线总温度150℃）

MIL MIL-T-7928/7 Notice 1-Cancellation

TERMINAL LUG & SPLICES, CONDUCTOR, CRIMP STYLE, COPPER TERMINAL LUG, CRIMP STYLE, COPPER, UNINSULATED, RING TONGUE TYPE I, CLASS 1 FOR 175 DEG. C TOTAL CONDUCTOR TEMPERATURE (S/S BY SAE-AS7928/7)
端子接线片和接头导体压接式铜端子接线片压接型铜不绝缘环形舌片类型I 1级 175摄氏度导体总温度（S/S BY SAE-AS7928/7）

MIL MIL-T-7928/7

TERMINAL LUG & SPLICES, CONDUCTOR, CRIMP STYLE, COPPER TERMINAL LUG, CRIMP STYLE, COPPER, UNINSULATED, RING TONGUE TYPE I, CLASS 1 FOR 175 DEG. C TOTAL CONDUCTOR TEMPERATURE (S/S BY SAE-AS7928/7)
端子接线片和接头导体压接式铜端子接线片压接式铜无绝缘环舌I型 175℃导体总温度1级（SAE-AS7928/7标准S/S）

GB/T 14315-2008

电力电缆导体用压接型铜、铝接线端子和连接管
Compression type terminal lugs and ferrules with copper or aluminum for power cables conductors

TERMINALS, LUG AND SPLICES, CONDUCTOR, CRIMP STYLE COPPER TERMINAL, LUG, CRIMP STYLE, COPPER, INSULATED, RING TONGUE, FOR THIN WALL WIRE, TIN WHISKER RESISTANT, TYPE II CLASS 1 FOR 105 °C TOTAL CONDUCTOR TEMPERATURE (Stabilized: Jul 2023)
端子、接线片和拼接件、导体、压接式铜端子、压接型接线片、铜、绝缘、环形舌片用于薄壁电线锡晶须电阻 II类1级适用于105°C总导体温度（稳定:2023年7月）

QPL QPL-AS7928-2

TERMINALS, LUG: SPLICES, CONDUCTOR: CRIMP STYLE, COPPER, GENERAL SPECIFICATION FOR(SUPERSEDING QPL-AS7928-1)
接线片端子:接头导体:压接式铜通用规范（代替QPL-AS7928-1）

QPL QPL-AS7928-2

TERMINALS, LUG: SPLICES, CONDUCTOR: CRIMP STYLE, COPPER, GENERAL SPECIFICATION FOR(SUPERSEDING QPL-AS7928-1)
接线片端子:接头导体:压接式铜通用规范（代替QPL-AS7928-1）

TERMINAL, LUG, CRIMP STYLE, COPPER, INSULATED, RECTANGULAR TONGUE, TYPE II, CLASS 1 FOR 105 °C TOTAL CONDUCTOR TEMPERATURE
端子接线片压接式铜绝缘矩形舌片 II型 1级总导体温度105℃

BS EN 3373-010-2009

Aerospace series. Terminal lugs and in-line splices for crimping on electric conductors-Terminal lugs, ring shaped, tin plated, for crimping on copper conductors, temperature up to 150 °C for metric and inch stud series. Product standard
航空航天系列用于压接电导体的端子接线片和串联接头镀锡环形端子接线片用于压接铜导线温度高达150°C 适用于公制和英制螺柱系列产品标准

BS EN 3373-011-2009

Aerospace series. Terminal lugs and in-line splices for crimping on electric conductors-Terminal lugs, ring shaped, nickel plated, for crimping on copper conductors, temperature up to 260 °C for metric and inch stud series. Product standard
航空航天系列用于压接电导体的端子接线片和串联接头端子接线片环形镀镍用于压接铜导线温度高达260°C 适用于公制和英制螺柱系列产品标准

TERMINALS, LUG AND SPLICES, CONDUCTOR, CRIMP STYLE, COPPER TERMINAL, LUG, INSULATED, TIN WHISKER RESISTANT, RING TONGUE, BELL-MOUTHED, TYPE II, CLASS 1 (FOR 150 °C TOTAL CONDUCTOR TEMPERATURE) (Stabilized: Jul 2023)
端子、接线片和拼接、导体、压接式、铜端子、绝缘接线片、锡晶须电阻、环形舌片、钟形模制、II型、1级（适用于150°C的导体总温度）（稳定:2023年7月）

MIL MS25189C Notice 2-Reactivation

TERMINAL, LUG, FLAG TYPE CRIMP STYLE, COPPER, CLASS I (ASG) (SUPERSEDING MS25189B)
终端 LUG 标签类型CRIMP STYLE COPPER I类（ASG）（取代MS25189B）

MIL MS25189C Notice 1-Cancellation

TERMINAL, LUG, FLAG TYPE CRIMP STYLE, COPPER, CLASS I (ASG) (SUPERSEDING MS25189B)
标志型压接式接线片铜 I级（ASG）（取代MS25189B）

TERMINAL, LUG, FLAG TYPE CRIMP STYLE, COPPER, CLASS I (ASG) (SUPERSEDING MS25189B)
一级（ASG）铜旗形压接式接线片端子（替代MS25189B）

MIL MIL-T-7928/1D Notice 1-Cancellation

TERMINAL, LUG & SPLICES, CONDUCTOR, CRIMP STYLE, COPPER TERMINAL, LUG, CRIMP STYLE, COPPER, INSULATED, RING TONGUE, FOR THIN WALL WIRE, TYPE II CLASS 1 FOR 105 DEG C TOTAL CONDUCTOR TEMPERATURE (SUPERSEDING MIL-T-7928/1C) (S/S BY SAE-AS7928/1A)
端子接线片和接头导体压接式铜端子接线头压接型铜绝缘环舌用于薄壁电线 II类1级导体总温度105°C（代替MIL-T-7928/1C）（S/S BY SAE-AS7928/1A）

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统