BS EN 124-5:2015适用于由复合材料C1、C2和C3制成的人孔顶部和集水沟顶部，通过使用适当控制的自动工艺，产生单一结构，且不包含多个粘合在一起的部件，具有1000 mm（含1000 mm）的净开口，用于覆盖集水沟，在行人和/或车辆通行区域内安装的人孔和检查室。本标准适用于仅可供行人和脚踏自行车手（A类15）、行人区和类似区域、停车场或停车场平台（B 125级）使用的区域内的人孔顶部和沟渠顶部，当从路缘边缘测量时，在行车道内最多延伸0.5 m，在行人区内最多延伸0.2 m（C 250级），此外，还应为所有类型的道路车辆（D 400级）提供用于道路（包括步行街）、硬路肩和停车区的人孔顶部。 本欧洲标准不单独适用，仅与EN 124-1结合使用，并根据EN 124-2、EN 124-3、EN 124-4或EN 124-6为复合材料制成的盖子/格栅与框架的组合提供了指南。本文件不适用于:用手糊法制造的人孔顶部和集水沟顶部；根据EN 1433，格栅/盖板作为预制排水沟的一部分；EN 1253（所有部分）中规定的建筑物的地面和屋顶排水沟；和表面盒子。交叉引用:EN 59EN 124-1:2015EN 124-2:2015EN 124-3:2015EN 124-4:2015EN 124-6:2015EN 13501-1:2007+A1:2009EN 13823EN ISO 62:2008EN ISO 175:2010ISO 175:2010EN ISO 527-2:2012ISO 527-2:2012EN ISO 4892-2: 2013EN ISO 4892-3:2013ISO 4892-3:2013ISO 1268-7ISO 1268-8ISO 2878ISO 3127EN 1253EN 1433EN ISO 6603-1:2000ISO 6603-1:2000EN ISO 9001ISO 9001与BS EN 124-1:2015、BS EN 124-2:2015、BS EN 124-3:2015、BS EN 124-4:2015和BS EN 124-6:2015一起取代了BS EN 124:1994。BS EN 124:1994撤回了购买本文件时的所有现行修订内容。

BS EN 124-5:2015 is applicable to manhole tops and gully tops made of composite materials C1, C2 and C3 by using suitably controlled automatic processes that produce a single structure and that do not contain multiple pieces bonded together, with a clear opening up to and including 1 000 mm for covering gullies, manholes and inspection chambers for installation within areas subjected to pedestrian and/or vehicular traffic.It is applicable to manhole tops and gully tops for use inareas which can only be used by pedestrians and pedal cyclists (class A 15),pedestrian areas and comparable areas, car parks or car parking decks (class B 125),the area of kerbside channels of roads which, when measured from the kerb edge, extends a maximum of 0,5 m into the carriageway and a maximum of 0,2 m into the pedestrian area (class C 250), and in addition to manhole tops for use incarriageways of roads (including pedestrian streets), hard shoulders and parking areas, for all types of road vehicles (class D 400).This European Standard is not applicable in isolation but only in combination with EN 124-1 and gives guidance for combinations of covers/gratings made of composite materials with frames according to EN 124-2, EN 124-3, EN 124-4 or EN 124-6.This document is not applicable to:manhole tops and gully tops manufactured by means of hand lay-up method;gratings/covers as part of prefabricated drainage channels according to EN 1433;floor and roof gullies in buildings which are specified in EN 1253 (all parts); andsurface boxes.Cross References:EN 59EN 124-1:2015EN 124-2:2015EN 124-3:2015EN 124-4:2015EN 124-6:2015EN 13501-1:2007+A1:2009EN 13823EN ISO 62:2008ISO 62:2008EN ISO 175:2010ISO 175:2010EN ISO 527-2:2012ISO 527-2:2012EN ISO 4892-2:2013ISO 4892-2:2013EN ISO 4892-3:2013ISO 4892-3:2013ISO 1268-7ISO 1268-8ISO 2878ISO 3127EN 1253EN 1433EN ISO 6603-1:2000ISO 6603-1:2000EN ISO 9001ISO 9001Together with BS EN 124-1:2015, BS EN 124-2:2015, BS EN 124-3:2015, BS EN 124-4:2015 and BS EN 124-6:2015, it supersedes BS EN 124:1994 which is withdrawnAll current amendments available at time of purchase are included with the purchase of this document.