ISO 4229:2017-螺钉和螺母的装配工具-单头工程师&apos；低扭矩用s型扳手.头部的最大外部尺寸和试验扭矩 -国家数字标准馆

现行 ISO 4229:2017

到馆阅读

收藏跟踪

购买正版

Assembly tools for screws and nuts — Single-head engineer's wrenches for lower torque applications — Maximum outside dimensions of heads and test torques 螺钉和螺母的装配工具-单头工程师&apos；低扭矩用s型扳手.头部的最大外部尺寸和试验扭矩

发布日期： 2017-04-04

ISO 13778:2017规定了标称宽度为3.2至120的单头工程师扳手的要求。
它规定了磁头的最大外部尺寸，并给出了测试扭矩值。“较低扭矩应用”的名称与较小的头部尺寸一致。
注:本文件涵盖的扳手是ISO 1703:2005中参考号1 01 0和1 01 1中确定的扳手。

ISO 13778:2017 specifies requirements of single-head engineer's wrenches with nominal width across flats from 3,2 to 120.
It specifies the maximum outside dimensions of heads and gives the test torque values. The "lower torque application" designation is in accordance with the smaller head dimensions.
NOTE The wrenches covered by this document are the ones identified in ISO 1703:2005 under reference Nos. 1 1 01 01 0 and 1 1 01 01 1.

分类信息

发布单位或类别：国际组织-国际标准化组织

ICS分类： 25.140.30手持工具 - 手工工具

关联关系

研制信息

归口单位： ISO/TC 29/SC 10

相似标准/计划/法规

ASSEMBLY TOOLS FOR SCREWS AND NUTS. SINGLE. HEAD ENGINEERS WRENCHES. CHARACTERISTICS AND TESTS METHODS.
螺钉和螺母的装配工具仅有一个的头扳手特性和测试方法

BS ISO 4229-2017

Assembly tools for screws and nuts. Single-head engineer's wrenches for lower torque applications. Maximum outside dimensions of heads and test torques
螺钉和螺母的装配工具用于低扭矩应用的单头工程师扳手封头的最大外部尺寸和试验扭矩

BS ISO 10102-2018

Assembly tools for screws and nuts. Double-headed open-ended engineers' wrenches. Outside dimensions
螺钉和螺母的装配工具双头开口工程扳手外部尺寸

Assembly tools for screws and nuts — Double-headed open-ended engineers' wrenches — Outside dimensions
螺钉和螺母用装配工具-双头开口工程师&apos；扳手.外部尺寸

BS ISO 7738-2015

Assembly tools for screws and nuts. Combination wrenches. Lengths of wrenches and maximum thickness of heads
螺钉和螺母的装配工具组合扳手扳手长度和头部最大厚度

Assembly tools for screws and nuts — Combination wrenches — Lengths of wrenches and maximum thickness of heads
螺丝和螺母装配工具 - 组合扳手 - 扳手长度和头部最大厚度

单头呆扳手
Single-head wrenches(ISO 4229:2017,Assembly tools for screws and nuts - Single-head engineer's wrenches for lower torque applications - Maximum outside dimensions of heads and test torques, MOD)

Assembly tools for screws and nuts. Double-headed open-ended engineers wrenches. Technical specifications and tests.
螺钉和螺母的装配工具双头开口扳手技术规格和测试

BS ISO 3318-2016

Assembly tools for screws and nuts. Open-ended wrenches, box wrenches and combination wrenches. Maximum widths of heads
螺钉和螺母的装配工具开口扳手、套筒扳手和组合扳手头部的最大宽度

Assembly tools for screws and nuts — Open-ended wrenches, box wrenches and combination wrenches — Maximum widths of heads
螺丝和螺母装配工具 - 双头开口扳手双头环扳手和组合扳手 - 头部最大宽度

ASSEMBLY TOOLS FOR SCREWS AND NUTS. DOUBLE-HEADED OPEN-ENDED WRENCHES,DOUBLE-HEADED RING WRENCHES AND COMBINATION WRENCHES. MAXIMUM WIDTHS OF HEADS.
螺钉和螺母的装配工具双头开口扳手、双头环形扳手和组合扳手头部的最大宽度

Assembly tools for screws and nuts. Forged and tubular socket wrenches. Maximum outside head dimensions.
螺钉和螺母的装配工具锻造和管状套筒扳手最大外部头部尺寸

Assembly tools for screws and nuts — Forged and tubular socket wrenches — Maximum outside head dimensions
螺钉和螺母的装配工具——锻造和管状套筒扳手——最大外封头尺寸

Assembly tools for screws and nuts. Double-headed, flat and offset, box wrenches. Technical specifications and tests.
螺钉和螺母的装配工具双头平头和偏置套筒扳手技术规格和测试

Assembly tools for screws and nuts. Socket wrench, double end, flex head. Technical specifications and tests.
螺钉和螺母的装配工具套筒扳手双头挠性头技术规格和测试

BS ISO 10104-2018

Assembly tools for screws and nuts. Double-headed box wrenches, deep offset and modified offset. Outside dimensions
螺钉和螺母的装配工具双头套筒扳手深偏置和改进偏置外部尺寸

Assembly tools for screws and nuts — Double-headed box wrenches, deep offset and modified offset — Outside dimensions
螺钉和螺母用装配工具.深偏置和改进偏置双头套筒扳手.外形尺寸

Assembly tools for screws and nuts — Doubled-headed box wrenches, flat and offset — Outside dimensions and test torques
螺钉和螺母用装配工具.平头和偏置双头套筒扳手.外部尺寸和试验扭矩

Assembly tools for screws and nuts. Double-headed, deep offset and modified offset, box wrenches. Technical specifications and tests.
螺钉和螺母的装配工具双头深偏置和改进偏置套筒扳手技术规格和测试

BS 09/30203525 DC

BS ISO 2236. Assembly tools for screws and nuts. Forged and tubular socket wrenches. Maximum outside head dimensions
BS ISO 2236 螺钉和螺母的装配工具锻造和管状套筒扳手最大外封头尺寸

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统