ISO 6803:2017描述了橡胶或塑料液压软管组件在高和低冲击压力下的软管冲击测试，无弯曲。高压试验在大于3MPa的压力下进行，在1.5MPa〜3MPa的压力下进行低压试验。测试程序适用于产品要求中包含在使用中的脉动压力的液压软管组件。 注意ISO 6802中可以找到具有弯曲的脉冲测试程序

ISO 6803:2017 describes hose impulse testing, without flexing, of rubber or plastics hydraulic hose assemblies at both high and low impulse pressures. The high-pressure testing is carried out at pressures greater than 3 MPa and the low-pressure testing at pressures from 1,5 MPa to 3 MPa. The test procedure is applicable to hydraulic hose assemblies that are subject to pulsating pressures in service which are included in the product requirements. NOTE Impulse test procedures with flexing can be found in ISO 6802.