Vitrified clay pipes systems for drain and sewers-Requirements for components of manholes and inspection chambers
排水和下水道用陶土管道系统

2013-02-28

Plastics piping and ducting systems - Thermoplastics shafts or risers for inspection chambers and manholes - Determination of ring stiffness
塑料管道和导管系统.检查室和人孔用热塑性塑料轴或立管.环刚度的测定

2011-03-02

Plastics piping systems for non-pressure drainage and sewerage. Polyester resin concrete (PRC)-Manholes and inspection chambers
无压排水和排污用塑料管道系统 聚酯树脂混凝土（PRC） 人孔和检查室

2010-01-31

Plastics piping systems for drainage and sewerage. Glass-reinforced thermosetting plastics (GRP) based on polyester resin (UP). Manholes and inspection chambers
排水和排污用塑料管道系统 基于聚酯树脂（UP）的玻璃纤维增强热固性塑料（GRP） 人孔和检查室

2013-10-31

prEN 15229. Plastics piping systems. Piping systems for non-pressure underground drainage and sewerage. Performance requirements for thermoplastics manholes and inspection chambers
普伦15229 塑料管道系统 无压地下排水和污水管道系统 热塑性人孔和检查室的性能要求

2005-04-25

Plastics piping systems - Thermoplastics shafts or risers for inspection chambers and manholes - Determination of resistance against surface and traffic loading
塑料管道系统.检查室和人孔用热塑性轴或立管.表面和交通荷载阻力的测定

2006-10-31

Plastics piping systems for non-pressure drainage and sewerage - Polyester resin concrete (PRC) - Part 2: Manholes and inspection chambers
无压排水和污水用塑料管道系统.聚酯树脂混凝土（PRC）.第2部分:人孔和检查室

2010-10-06

EN 15383. Plastics piping systems for drainage and sewerage. Glass-reinforced thermosetting plastics (GRP) based on polyester resin (UP). Manholes and inspection chambers
EN 15383 排水和排污用塑料管道系统 基于聚酯树脂（UP）的玻璃纤维增强热固性塑料（GRP） 人孔和检查室

2005-11-01

EN 15383. Plastics piping systems for drainage and sewerage. Glass-reinforced thermosetting plastics (GRP) based on polyester resin (UP). Manholes and inspection chambers
EN 15383 排水和排污用塑料管道系统 基于聚酯树脂（UP）的玻璃纤维增强热固性塑料（GRP） 人孔和检查室

2010-10-26

Plastics piping systems for drainage and sewerage - Glass-reinforced thermosetting plastics (GRP) based on polyester resin (UP) - Manholes and inspection chambers (includes Amendment A1:2013)
排水和污水用塑料管道系统.基于聚酯树脂（UP）的玻璃纤维增强热固性塑料（GRP）.人孔和检查室；德文版EN 15383:2012+A1:2013

2014-02-01

BS EN 295-6. Vitrified clay pipes systems for drains and sewers Part 6. Requirements for components of manholes and inspection chambers
英国标准EN 295-6 排水管和下水道用陶土管道系统第6部分 人孔和检查室部件的要求

2010-07-21

EN 14636-2. Plastics piping systems for non-pressure drainage and sewerage. Polyester resin concrete (PRC). Part 2. Manholes and inspection chambers
EN 14636-2 无压排水和排污用塑料管道系统 聚酯树脂混凝土（PRC） 第二部分 人孔和检查室

2006-05-15

Plastics piping systems for non-pressure underground drainage and sewerage. Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE)-Specifications for manholes and inspection chambers
无压地下排水和排污用塑料管道系统 未增塑聚氯乙烯（PVC-U）、聚丙烯（PP）和聚乙烯（PE）

2020-07-31

Draft Document - Plastics piping systems for non-pressure underground conveyance and storage of non-potable water - Manholes, inspection chambers and road gullies for storm water systems made of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 1: Specifications for storm water manholes and inspection chambers; German and English version prEN 17670-1:2021
文件草案.非饮用水无压地下输送和储存用塑料管道系统.未增塑聚氯乙烯（PVC-U）、聚丙烯（PP）和聚乙烯（PE）制雨水系统用人孔、检查室和道路排水沟.第1部分:规范

2021-06-01

Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 2: Specifications for manholes and inspection chambers in traffic areas and deep underground installations
无压地下排水和排污用塑料管道系统.未增塑聚氯乙烯（PVC-U） 聚丙烯（PP）和聚乙烯（PE）.第2部分:交通区域和深地下设施的人孔和检查室规范

2009-09-23

Plastics piping systems for non-pressure underground drainage and sewerage — Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP), polypropylene with mineral modifiers (PP-MD) and polyethylene (PE) — Specifications for manholes and inspection chambers in traffic areas and underground installations
无压地下排水和排污用塑料管道系统——未增塑聚氯乙烯（PVC-U）、聚丙烯（PP）、含矿物改性剂的聚丙烯（PP-MD）以及聚乙烯（PE）和mdash；交通区域和地下设施的人孔和检查室规范

2011-10-06

进口旧机电产品检验技术要求 第11部分:注塑机
Technical requirements for the inspection of used electrical mechanical products for import-Part 11:Injection moulding machines for rubber and plastics

2015-05-26

进出口轻工成套设备检验技术要求 第2部分：塑料及产品加工设备
Technical requirements for the inspection of light industry's complete set of equipment for import and export Part 2:Plastic and production facilities

2013-11-06

Draft Document - Plastics piping systems for non-pressure underground conveyance and storage of non-potable water - Manholes, inspection chambers and road gullies for storm water systems made of unplasticized polyvinyl chloride (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 2: Specification for road gullies; German and English version prEN 17670-2:2021
文件草案.非饮用水无压地下输送和储存用塑料管道系统.未增塑聚氯乙烯（PVC-U）、聚丙烯（PP）和聚乙烯（PE）制雨水系统用人孔、检查室和道路排水沟.第2部分:规范

2021-06-01