本国际标准规定了适用于步行的机械安全要求和试验方法 动力磨边机，采用刚性切割方式，刀尖圆直径不超过305 mm，以及 其中，叶尖圆的平面设计为与垂直方向的夹角不超过15°。 本国际标准适用于采用刚性切割元件的手持式便携式动力磨边机 具有直径不超过305 mm的叶尖圆。 本国际标准还包括噪声和振动的试验方法。 本国际标准不包括采用非金属丝线或自由旋转切割方式的磨边机 非金属刀具。 本国际标准不包括改变机器功能的附件或附件。 本国际标准不包括电动磨边机的电气方面。对于 适用于电动机器的电气要求，应参考IEC 60335-1。 注:有关自行式机器的运动控制要求，请参考ISO 5395。

This International Standard specifies mechanical safety requirements and test methods applicable to walk-behind powered edgers that employ rigid cutting means with a blade tip circle not more than 305 mm in diameter, and where the plane of the blade tip circle is designed to operate at not more than 15° from the vertical. This International Standard applies to hand-held portable and powered edgers employing a rigid cutting element with a blade tip circle not more than 305 mm in diameter. This International Standard also includes test methods for noise and vibration. This International Standard does not cover edgers with cutting means of non-metallic filament line or freely pivoting non-metallic cutters. This International Standard does not cover accessories or attachments that alter the function of the machine. The electrical aspects of electrically powered edgers are not covered by this International Standard. For the electrical requirements applicable to electrically driven machines, reference should be made to IEC 60335-1. NOTE — For motion control requirements related to self-propelled machines, reference should be made to ISO 5395.