请注意:此版本的所有临时修订版将在您购买时提供。范围和目的IEC 61215的本部分规定了IEC 60721-2-1中定义的适用于在一般露天气候下长期运行的地面光伏组件的设计鉴定和型式认证的IEC要求。本标准适用于所有晶体硅地面平板模块。本标准不适用于使用集中阳光的组件，尽管它可用于低聚光组件（1到3个太阳）。对于低浓度模块，所有测试均使用设计浓度下预期的电流、电压和功率水平进行。本试验顺序的目的是确定模块的电气和热特性，并尽可能在合理的成本和时间限制范围内证明模块能够承受范围内所述气候下的长期暴露。 如此合格的模块的实际预期寿命将取决于其设计、环境和运行条件。本标准定义了根据IEC 61215-1:2016和IEC 61215-2:2016对测试程序和要求进行的光伏技术相关修改。

Please note: All interim revisions for this edition available at time of your purchase will be included.Scope and objectThis part of IEC 61215 lays down IEC requirements for the design qualification and type approval of terrestrial photovoltaic modules suitable for long-term operation in general open air climates, as defined in IEC 60721-2-1. This standard is intended to apply to all crystalline silicon terrestrial flat plate modules.This standard does not apply to modules used with concentrated sunlight although it may be utilized for low concentrator modules (1 to 3 suns). For low concentration modules, all tests are performed using the current, voltage and power levels expected at the design concentration.The object of this test sequence is to determine the electrical and thermal characteristics of the module and to show, as far as possible within reasonable constraints of cost and time, that the module is capable of withstanding prolonged exposure in climates described in the scope. The actual lifetime expectancy of modules so qualified will depend on their design, their environment and the conditions under which they are operated.This standard defines PV technology dependent modifications to the testing procedures and requirements per IEC 61215-1:2016 and IEC 61215-2:2016.