1.1 本规范涵盖了适用于一般建筑和结构用途石英基尺寸石材选择的材料特性、物理要求和取样。请参阅指南 1242元 和 1528元 以便正确选择和使用石英基尺寸石。 1.2 石英基尺寸石应包括锯切、切割、分割或以其他方式修整或成型的石头，并应特别排除由碎片组成的模制、铸造或其他人工聚合单元，以及碎石和碎石。 1.3 以国际单位或英寸-磅单位表示的数值应单独视为标准值。每个系统中规定的值可能不完全相等； 因此，每个系统应独立于其他系统使用。结合两个系统的值可能会导致不符合标准。 1.4 本国际标准是根据世界贸易组织技术性贸易壁垒（TBT）委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认标准化原则制定的。

1.1 This specification covers the material characteristics, physical requirements, and sampling appropriate to the selection of quartz-based dimension stone for general building and structural purposes. Refer to Guides C1242 and C1528 for the appropriate selection and use of quartz-based dimension stone. 1.2 Quartz-based dimension stone shall include stone that is sawed, cut, split, or otherwise finished or shaped, and shall specifically exclude molded, cast, or otherwise artificially aggregated units composed of fragments, and also crushed and broken stone. 1.3 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.