首页 馆藏资源 舆情信息 标准服务 科研活动 关于我们
现行 EN 14317-2:2007
到馆阅读
收藏跟踪
购买正版
Thermal insulation products for buildings - In-situ thermal insulation formed from exfoliated vermiculite (EV) products - Part 2: Specification for the installed products 建筑保温产品 - 由脱落蛭石(EV)产品形成的原位保温 - 第2部分:安装产品规格
发布日期: 2007-01-31
实施日期: 2007-01-31
本欧洲标准规定了四种类型的剥离蛭石产品蛭石聚集体(EVA),涂覆蛭石(EVC),疏水蛭石(EVH)和预混蛭石(EVM)的要求,其含有附件D中定义的少于1%的有机材料的EN14317-1:2004用于屋顶,天花板,墙壁和地板的原位保护。 标准的第2部分是安装产品的规范。 本标准第2部分还规定了用于产品安装人员所作声明的检查和测试程序。 本欧洲标准没有规定产品在特定应用中展现适合目的的所有属性所需的水平。在法规或非冲突标准中可以找到所需的级别。 本欧洲标准不包括成形形状的工厂绝缘产品和用剥离蛭石制成的板,或用于建筑设备和工业设备绝缘的原位产品。 本欧洲标准没有规定机载隔音和吸声应用的性能要求
This European Standard specifies the requirements for the four types of exfoliated vermiculite products Vermiculite Aggregate (EVA), Coated Vermiculite (EVC), Hydrophobic Vermiculite (EVH) and Premixed Vermiculite (EVM), containing less than 1 % organic material as defined by Annex D of EN14317-1:2004 for in-situ insulation of roofs, ceilings, walls and floors. This Part 2 of the standard is a specification for the installed products. This Part 2 of this standard also specifies the checks and test procedures to be used for the declaration made by the installer of the product. This European Standard does not specify the required level of all properties to be achieved by a product to demonstrate fitness for purpose in a particular application. The required levels are to be found in regulations or non-conflicting standards. This European Standard does not include factory made insulation products of formed shapes and boards made with exfoliated vermiculite or in-situ products intended to be used for the insulation of building equipment and industrial installations. This European Standard does not specify performance requirements for airborne sound insulation and for acoustic absorption applications.
分类信息
关联关系
研制信息
归口单位: CEN/TC 88-
相似标准/计划/法规
现行
EN 14317-1-2004
Thermal insulation products for buildings - In-situ thermal insulation formed from exfoliated vermiculite (EV) products - Part 1: Specification for bonded and loose-fill products before installation
建筑保温产品 - 由脱落蛭石(EV)产品形成的原位保温 - 第1部分:安装前粘结和松散填充产品的规格
2004-08-18
现行
EN 15600-2-2010
Thermal insulation products for building equipment and industrial installations - In-situ thermal insulation formed from exfoliated vermiculite (EV) products - Part 2: Specification for the installed products
用于建筑设备和工业设施的隔热产品 - 由脱落蛭石(EV)产品形成的原位保温 - 第2部分:安装产品规格
2010-07-07
现行
EN 14063-2-2013
Thermal insulation products for buildings - In-situ formed expanded clay lightweight aggregate products - Part 2: Specification for the installed products
建筑保温产品 - 原位形成的膨胀土轻质骨料产品 - 第2部分:安装产品规格
2013-07-10
现行
EN 15600-1-2010
Thermal insulation products for building equipment and industrial installations - In-situ thermal insulation formed from exfoliated vermiculite (EV) products - Part 1: Specification for bonded and loose-fill products before installation
用于建筑设备和工业设施的隔热产品 - 由脱落的蛭石(EV)产品形成的原位保温 - 第1部分:安装前粘合和松散填充产品的规范
2010-07-07
现行
EN 14316-2-2007
Thermal insulating products for buildings - In-situ thermal insulation formed from expanded perlite (EP) products - Part 2: Specification for the installed products
建筑隔热产品 - 由膨胀珍珠岩(EP)产品形成的原位保温 - 第2部分:安装产品规格
2007-01-31
现行
EN 15599-2-2010
Thermal insulation products for building equipment and industrial installations - In-situ thermal insulation formed from expanded perlite (EP) products - Part 2: Specification for the installed products
建筑设备和工业设施的隔热产品 - 膨胀珍珠岩(EP)产品形成的原位保温 - 第2部分:安装产品规格
2010-07-07
现行
UNE-EN 14317-2-2009
Thermal insulation products for buildings. In-situ thermal insulation formed from exfoliated vermiculite (EV) products. Part 2: Specification for the installed products.
建筑隔热产品 由膨胀蛭石(EV)产品形成的现场隔热 第2部分:已安装产品的规范
2009-06-17
现行
EN 15599-1-2010
Thermal insulation products for building equipment and industrial installations - In-situ thermal insulation formed from expanded perlite (EP) products - Part 1: Specification for bonded and loose-fill products before installation
建筑设备和工业设施的保温产品 - 由膨胀珍珠岩(EP)产品形成的原位保温 - 第1部分:安装前粘合和松散填充产品的规格
2010-07-07
现行
EN 14064-2-2010
Thermal insulation products for buildings - In-situ formed loose-fill mineral wool (MW) products - Part 2: Specification for the installed products
建筑物隔热产品 - 原位形成的松散填充矿棉(MW)产品 - 第2部分:安装产品规格
2010-02-24
现行
EN 14316-1-2004
Thermal insulation products for buildings - In-situ thermal insulation formed from expanded perlite (EP) products - Part 1: Specification for bonded and loose-fill products before installation
建筑隔热产品 - 由膨胀珍珠岩(EP)产品形成的原位保温 - 第1部分:安装前粘结和松散填充产品的规格
2004-08-18