MIL MIL-DTL-17505H-软管和软管组件橡胶油和汽油吸入和排出-国家数字标准馆

现行 MIL MIL-DTL-17505H

到馆提醒

收藏跟踪

购买正版

Hose and Hose Assembly, Rubber, Oil and Gasoline, Suction and Discharge 软管和软管组件橡胶油和汽油吸入和排出

发布日期： 2018-07-18

MIL-DTL-17505H涵盖了用于输送燃料（如海军专用燃油、柴油、机油、喷气燃料（JP-5或JP-8）、车用汽油和航空汽油）的吸入和排放服务的光滑孔软管和软管组件。该软管用于处理芳烃含量不超过30%的石油产品。该软管的最大工作压力为每平方英寸150磅力（psi）（1034千帕（kPa））。

MIL-DTL-17505H covers smooth-bore hose and hose assemblies for suction and discharge service in the transfer of fuels, such as Navy special fuel oil, diesel fuel, oil, jet fuel (JP-5 or JP-8), motor gasoline, and aviation gasoline. The hose is intended to handle petroleum products having an aromatic content no greater than 30 percent. The maximum working pressure of this hose is 150 pound-force per square inch (psi) (1 034 kilopascal (kPa)).

分类信息

发布单位或类别：美国-美国军事规范和标准

关联关系

研制信息

相似标准/计划/法规

BS ISO 1823-2015

Rubber hose and hose assemblies for oil suction and discharge service. Specification
吸油和排油用橡胶软管和软管组件规格

오일 흡입 및 배출 서비스를 위한 고무 호스 및 호스 어셈블리 — 사양
用于吸油和排气服务的橡胶软管和软管组件 - 规格

Rubber hose and hose assemblies for oil suction and discharge service — Specification
用于吸油和排气服务的橡胶软管和软管组件 - 规格

BS EN 1765-2016

Rubber hose assemblies for oil suction and discharge services. Specification for the assemblies
吸油和排油用橡胶软管组件组件规范

UNE-EN 1765-2005

Rubber hose assemblies for oil suction and discharge services - Specification for the assemblies
吸油和排油用橡胶软管组件.组件规范

Rubber hoses and hose assemblies for water suction and discharge — Specification
吸水和排水用橡胶软管和软管组件规范

물 흡입 및 배수용 고무 호스와 호스 어셈블리 — 요구사항
橡胶软管和软管组件用于吸水和排放 - 规格

BS EN ISO 4641-2016

Rubber hoses and hose assemblies for water suction and discharge. Specification
吸水和排水用橡胶软管和软管组件规格

HOSE, RUBBER, AND HOSE ASSEMBLIES, RUBBER, SMOOTH BORE, WATER SUCTION AND DISCHARGE
软管橡胶和软管组件橡胶光滑孔吸水和排水

HOSE, RUBBER, AND HOSE ASSEMBLIES, RUBBER, SMOOTH BORE, WATER SUCTION AND DISCHARGE
软管橡胶和软管组件橡胶光滑孔吸水和排水

GOST R ISO 4641-2020

Рукава напорно-всасывающие резиновые и рукава в сборе для воды. Технические требования
吸水和排水用橡胶软管和软管组件技术要求

MIL MIL-H-17505E

HOSE AND HOSE ASSEMBLY, RUBBER, OIL AND GASOLINE, SUCTION AND DISCHARGE(S/S BY MIL-DTL-17505F) (SUPERSEDING MIL-H-17505D)
软管和软管组件橡胶油和汽油吸入和排出（S/S由MIL-DTL-17505F提供）（取代MIL-H-17505D）

GB/T 10541-2023

近海停泊排吸油橡胶软管
Rubber hose, oil suction and discharge, offshore mooring

BS 04/30110371 DC

ISO 4641. Rubber hoses and hose assemblies for water suction and discharge. Specification
ISO 4641 吸水和排水用橡胶软管和软管组件规格

BS 5173-102.10-1990

Methods of test for rubber and plastics hoses and hose assemblies. Hydraulic pressure tests-Hydrostatic tests for oil suction and discharge hose
橡胶和塑料软管及软管组件的试验方法液压试验

Rubber hose assemblies for oil suction and discharge services-Recommendations for storage, testing and use
吸油和排油用橡胶软管组件

UNE-EN ISO 4641-2009

Rubber hoses and hose assemblies for water suction and discharge - Specification (ISO 4641:2005)
吸水和排水用橡胶软管和软管组件.规范（ISO 4641-2005）

BS 09/30200633 DC

BS ISO 4641. Rubber hoses and hose assemblies for water suction and discharge. Specification
BS ISO 4641 吸水和排水用橡胶软管和软管组件规格

MIL MIL-H-0015100F Notice 1-Cancellation

HOSE, RUBBER, WIRE REINFORCED (OIL AND GASOLINE, SUCTION AND DISCHARGE SMOOTH BORE) (NO S/S DOCUMENT) (SUPERSEDING MIL-H-15100E)
钢丝增强橡胶软管（油和汽油吸入和排出光滑孔）（无S/S文件）（代替MIL-H-15100E）

MIL MIL-DTL-28693B

HOSE, RUBBER, OIL AND GASOLINE DISCHARGE, SMOOTH BORE, LIGHTWEIGHT BUOYANT TYPE, LONGITUDINALLY REINFORCED, 6 INCH (SUPERSEDING MIL-DTL-28693A)
软管橡胶油和汽油排放光滑孔轻型浮力型纵向加强 6英寸（取代MIL-DTL-28693A）

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统