首页 馆藏资源 舆情信息 标准服务 科研活动 关于我们
现行 ASTM D1765-23b
到馆提醒
收藏跟踪
购买正版
Standard Classification System for Carbon Blacks Used in Rubber Products 橡胶制品用炭黑的标准分类系统
发布日期: 2023-12-15
1.1 该分类系统采用四个字符的命名系统对橡胶级炭黑进行分类。第一个特征给出了炭黑对含有炭黑的典型橡胶化合物的固化速率的影响的一些指示。第二个字符给出了关于炭黑的平均表面积的信息。最后两个字符是任意分配的。 1.2 在本分类系统发布时,目前已指定编号的所有橡胶级炭黑均列在 表1 以及它们的一些典型特性。中未列出的ASTM分类号(“N”或“S”名称) 表1 已撤回或当前未分配。禁止使用未激活或未分配的N或S名称,直到小组委员会D24正式重新激活或分配该名称为止。 41 1.3 以国际单位制表示的数值应视为标准。括号中给出的值仅供参考。 1.4 本标准并不旨在解决与其使用相关的所有安全问题(如有)。本标准的使用者有责任在使用前制定适当的安全、健康和环境实践,并确定监管限制的适用性。 1.5 本国际标准是根据世界贸易组织技术性贸易壁垒委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认的标准化原则制定的。
1.1 This classification system covers the classification of rubber-grade carbon blacks by the use of a four-character nomenclature system. The first character gives some indication of the influence of the carbon black on the rate of cure of a typical rubber compound containing the black. The second character gives information on the average surface area of the carbon black. The last two characters are assigned arbitrarily. 1.2 All rubber-grade carbon blacks for which a number is currently assigned at the time of publication of this classification system are listed in Table 1 together with some of their typical properties. ASTM classification numbers (“N” or “S” designation) not listed in Table 1 have either been withdrawn or are not currently assigned. The use of inactive or unassigned N or S designations is prohibited until such a time as the designation is officially reactivated or assigned by Subcommittee D24.41 1.3 The values stated in SI units are to be regarded as standard. The values given in parentheses are for information only. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
分类信息
关联关系
研制信息
归口单位: D24.41
相似标准/计划/法规