埋入元件印制根性能规范
Performace specification for embedded passive devices printed circuit boards

2018-01-18

METAL-CLAS BASE MATERIALS FOR PRINTED CIRCUITS. SPECIAL MATERIALS. SPECIFICATION NO.1: PRE-PREG FOR MULTILAYER PRINTED BOARDS
印刷电路板用金属覆层基材 特殊材料 规范1:多层印制板的预浸

1981-12-15

Metal-clad base materials for printed wiring boards. Special materials used in connection with printed circuits-Specification for prepreg for use as a bonding sheet material in the fabrication of multilayer printed board
印制线路板用金属覆层基材 与印刷电路有关的特殊材料 多层印制板制造中用作粘合片材料的预浸料规范

1990-02-28

印制电路用金属基覆铜箔层压板通用规范
General specification for metal base copper-clad laminates for printed circuits

2018-06-07

Metal-clad base materials for printed wiring boards. Special materials used in connection with printed circuits-Specification for permanent polymer coating materials (solder resist) for use in the fabrication of printed boards
印制线路板用金属覆层基材 与印刷电路有关的特殊材料 印制板制造用永久性聚合物涂层材料（阻焊剂）规范

1992-03-31

Metal-clad base materials for printed wiring boards. Special materials used in connection with printed circuits-Specification for copper foil for use in the manufacture of copper-clad base materials
印制线路板用金属覆层基材 与印刷电路有关的特殊材料 覆铜基材制造用铜箔规范

1990-02-28

BASE MATERIALS FOR PRINTED CIRCUITS. PART 2: SPECIFICATIONS. SPECIFICATION Nº 17: THIN POLYIMIDE WOVEN GLASS FABRIC COPPER-CLAD LAMINATED SHEET OF DEFINED FLAMMABILITY FOR USE IN THE FABRICATION OF MULTILAYER PRINTED BOARD.
印刷电路的基材 第2部分:规范 规范Nº17:多层印制板制造用规定可燃性的薄聚酰亚胺编织玻璃纤维覆铜层压板

1997-08-11

BASE MATERIALS FOR PRINTED CIRCUITS. PART 2: SPECIFICATIONS. SPECIFICATION Nº 12: THIN EPOXIDE WOVEN GLASS FABRIC COPPER-CLAD LAMINATED SHEET OF DEFINED FLAMMABILITY, FOR USE IN THE FABRICATION OF MULTILAYER PRINTED BOARDS.
印刷电路的基材 第2部分:规范 规范12:多层印制板制造用规定可燃性的薄环氧玻璃纤维织物覆铜层压板

1996-07-24

BASE MATERIALS FOR PRINTED CIRCUITS. PART 2: SPECIFICATIONS. SPECIFICATION Nº 11: THIN EPOXIDE WOVEN GLASS FABRIC COPPER-CLAD LAMINATED SHEET, GENERAL PURPOSE GRADE, FOR USE IN THE FABRICATION OF MULTILAYER PRINTED BOARDS.
印刷电路的基材 第2部分:规范 规范11:用于制造多层印制板的通用级薄环氧玻璃纤维织物覆铜层压板

1996-07-24

인쇄 회로 기판 재료－제2부：규격－ 제11장：다층 인쇄 회로 기판 제조용 일반 등급의 박막 에폭시 유리 섬유 직물 동 입힘 적층판
印制电路用基材第2部分:第11号规范:多层印制板制造用通用级薄环氧玻璃纤维布覆铜层压板

2002-08-31

인쇄 회로 기판 재료－제2부：규격－ 제11장：다층 인쇄 회로 기판 제조용 일반 등급의 박막 에폭시 유리 섬유 직물 동 입힘 적층판
印刷电路用基材第2部分:第11号规范:多层印制板制造用通用级薄环氧玻璃织物覆铜层压板

2002-08-31

Specifications-Metal-clad base materials for printed wiring boards. Copper-clad base material. Specification for epoxide cellulose paper copper-clad laminated sheet of defined flammability (vertical burning test)
规格

2001-04-15

Specification for metal-clad base materials for printed circuits-Silicone woven glass fabric copper-clad laminated sheet Si-GC-Cu-13
印制电路用金属覆层基材规范 硅机织玻璃纤维覆铜层压板Si-GC-Cu-13

1977-11-30

Base materials for printed circuits; part 3: special materials; specification No. 3: permanent polymer coating materials (solder-resist) for use in the fabrication of printed boards; identical with IEC 60249-3-3:1991
印刷电路用基材；第三部分:特殊材料；规范3:印制板制造用永久性聚合物涂层材料（阻焊剂）；与IEC 60249-3-3:1991相同

1994-06-01

BASE MATERIALS FOR PRINTED CIRCUITS. PART 2: SPECIFICATIONS. SPECIFICATION Nº 19: THIN BISMALEIMIDE/TRIAZINE MODIFIED EPOXIDE WOVEN GLASS FABRIC COPPER-CLAD LAMINATED SHEET OF DEFINED FLAMMABILITY FOR USE IN THE FABRICATION OF MULTILAYER PRINTED BOARDS.
印刷电路的基材 第2部分:规范 规范19:多层印制板制造用规定可燃性的双马来酰亚胺/三嗪改性环氧编织玻璃纤维覆铜薄层压板

1997-10-17

BASE MATERIALS FOR PRINTED CIRCUITS. PART 2: SPECIFICATIONS. SPECIFICATION Nº 19: THIN BISMALEIMIDE/TRIAZINE MODIFIED EPOXIDE WOVEN GLASS FABRIC COPPER-CLAD LAMINATED SHEET OF DEFINED FLAMMABILITY FOR USE IN THE FABRICATION OF MULTILAYER PRINTED BOARDS.
印刷电路的基材 第2部分:规范 规范19:多层印制板制造用规定可燃性的双马来酰亚胺/三嗪改性环氧编织玻璃纤维覆铜薄层压板

1997-10-17

BASE MATERIALS FOR PRINTED CIRCUITS. PART 2: SPECIFICATIONS. SPECIFICATION Nº 19: THIN BISMALEIMIDE/TRIAZINE MODIFIED EPOXIDE WOVEN GLASS FABRIC COPPER-CLAD LAMINATED SHEET OF DEFINED FLAMMABILITY FOR USE IN THE FABRICATION OF MULTILAYER PRINTED BOARDS.
印刷电路的基材 第2部分:规范 规范19:多层印制板制造用规定可燃性的双马来酰亚胺/三嗪改性环氧编织玻璃纤维覆铜薄层压板

1997-08-11

Specification for metal-clad base materials for printed circuits-Phenolic cellulose paper copper-clad laminated sheet of medium electrical quality: PF-CP-Cu-5
印制电路用金属覆层基材规范 中等电气质量酚醛纤维素纸覆铜层压板:PF-CP-Cu-5

1972-07-28

Specification for metal-clad base materials for printed circuits-Phenolic cellulose paper copper-clad laminated sheet of medium electrical quality, flame retardant grade: PF-CP-Cu-6
印制电路用金属覆层基材规范 阻燃级中等电气质量酚醛纤维素纸覆铜层压板:PF-CP-Cu-6

1972-07-28