本SAE标准规定了适用于液压制动总泵的塑料储液罐总成的性能试验程序和要求（参考SAE J1153）。预期用途适用于使用符合FMVSS 116（DOT 3）、SAE J1703和SAE J1704规范的制动液的道路车辆。本文件包括作为储液罐组件组成部分的盖/盖和隔膜。液位传感器（FLS）也是总成的一个组成部分。但是，本文件未涵盖的其他FLS标准和/或要求适用且必要。本文件旨在为已证明具有令人满意的现场性能的各制造商普遍使用的储液罐组件提供当前既定设计的最低性能要求。本文件适用于商业或售后生产的新储液罐组件。

This SAE Standard specifies the performance test procedures and requirements of a plastic reservoir assembly suitable for use on a Hydraulic Brake Master Cylinder (reference SAE J1153). Intended usage is for on-road vehicles using brake fluid conforming to FMVSS 116 (DOT 3), and SAE J1703, and SAE J1704 specifications. This document includes the cap/cover and diaphragm as integral parts of the reservoir assembly. The fluid level sensor (FLS) is also included as an integral part of the assembly. However, additional FLS standards and/or requirements are applicable and necessary which are not covered in this document.This document is intended to provide minimum performance requirements of current established designs on those reservoir assemblies generally used by individual manufacturers which have demonstrated satisfactory field performance. This document is applicable to new reservoir assemblies for commercial or aftermarket production.