Electric Spas, Equipment Assemblies, and Associated Equipment
电风扇、设备组件和相关设备

2009-07-16

Standard for Electric Spas, Equipment Assemblies, and Associated Equipment (CSDS Proposal, 5/19/2017)
电气SPA、设备组件和相关设备标准（CSDS提案 2017年5月19日）

2017-05-19

CABLE ASSEMBLIES AND CORD ASSEMBLIES, ELECTRICAL, USED WITH COMMUNICATION EQUIPMENTS, STANDARD TOLERANCES FOR (SUPERSEDING MS75027C)
与通信设备一起使用的电气电缆组件和软线组件的标准公差（代替MS75027C）

2005-10-24

CABLE ASSEMBLIES AND CORD ASSEMBLIES, ELECTRICAL, USED WITH COMMUNICATION EQUIPMENTS, STANDARD TOLERANCES FOR (SUPERSEDING MS75027C)
通信设备用电缆组件和电线组件的标准公差（取代MS75027C）

1986-01-03

IEEE Standard Conformance Test Procedures for Equipment Interconnecting Distributed Energy Resources with Electric Power Systems and Associated Interfaces
将分布式能源与电力系统和相关接口互连的设备的IEEE标准一致性测试程序

2020-05-21

Standard Specification for In-Service Test Methods for Temporary Grounding Jumper Assemblies Used on De-Energized Electric Power Lines and Equipment
断电电力线路和设备上使用的临时接地跳线组件在用试验方法的标准规范

2024-01-01

ELECTRICAL, ELECTRONIC, AND ELECTRO-MECHANICAL EQUIPMENT, GUIDED MISSILE AND ASSOCIATED WEAPON SYSTEMS, GENERAL STANDARD FOR THE DESIGN OF (S/S BY MIL-HDBK-11991) (SUPERSEDING MIL-E-11991E)
制导导弹及相关武器系统的电气、电子和机电设备设计通用标准（由MIL-HDBK-11991设计）（代替MIL-E-11991E）

1992-10-30

ELECTRICAL, ELECTRONIC, AND ELECTRO-MECHANICAL EQUIPMENT, GUIDED MISSILE AND ASSOCIATED WEAPON SYSTEMS, GENERAL STANDARD FOR THE DESIGN OF (S/S BY MIL-HDBK-11991) (SUPERSEDING MIL-E-11991E)
制导导弹及相关武器系统的电气、电子和机电设备设计通用标准（由MIL-HDBK-11991设计）（代替MIL-E-11991E）

1996-01-30

ELECTRICAL, ELECTRONIC, AND ELECTRO-MECHANICAL EQUIPMENT, GUIDED MISSILE AND ASSOCIATED WEAPON SYSTEMS, GENERAL STANDARD FOR THE DESIGN OF (S/S BY MIL-HDBK-11991) (SUPERSEDING MIL-E-11991E)
电气、电子和机电设备、导弹及相关武器系统设计通用标准（由MIL-HDBK-11991提供）（取代MIL-E-11991E）

1990-09-07

Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 031: Safety requirements for hand-held probe assemblies for electrical measurement and test (Binational standard with UL 61010-031)
测量、控制和实验室用电气设备的安全要求.第031部分:电气测量和试验用手持式探头组件的安全要求（与UL 61010-031的两国标准）

2017-01-01

Aerospace series. Cables, electrical, for general purpose, single and multicore assembly. XLETFE Family. Jacketed or screened and jacketed-SX, TC and UC. Nickel plated copper. Operating temperatures, between -65°C and 150°C. Single extruded wall for equipment only, with jacket and screen (spiral). UV laser printable. Product standard
航空航天系列 单芯和多芯组件通用电气电缆 XLETFE家族 加套或屏蔽加套

2011-10-31

Aerospace series. Cables, electrical, for general purpose, single and multicore assembly. XLETFE Family-BJ. Nickel plated copper. Operating temperatures, between -65°C and 150°C. Single extruded wall for use as cable cores or within equipment in areas of high vibration, cable flexing and fluid contamination. UV laser printable. Product standard
航空航天系列 单芯和多芯组件通用电气电缆 XLETFE家族 北京 镀镍铜 工作温度在-65°C和150°C之间 单挤压壁 用作电缆芯或在高振动、电缆弯曲和流体控制区域的设备内使用

2012-02-29

Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Jacketed or screened and jacketed - Part 013: SX, TC and UC - Nickel plated copper - Operating temperatures between -65 °C and 150 °C - Single extruded wall for equipment only, with jacket and screen (spiral) - UV laser printable - Product standard; German and English version EN 4612-013:2011
航空航天系列.单芯和多芯组件通用电气电缆.XLETFE系列.带护套或屏蔽和护套.第013部分:SX TC和UC.镀镍铜.工作温度在-65℃和150℃之间.仅设备用带护套和

2012-03-01

Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Part 009: BJ - Nickel plated copper - Operating temperatures, between -65 °C and 150 °C - Single extruded wall for use as cable cores or within equipment in areas of high vibration, cable flexing and fluid contamination - UV laser printable - Product standard; German and English version EN 4611-009:2012
航空航天系列.单芯和多芯组件通用电气电缆.XLETFE系列.第009部分:BJ.镀镍铜.工作温度在-65℃到150℃之间.用作电缆芯或在高振动、电缆弯曲区域的设备内使用的单挤压壁

2012-04-01