인쇄기판에 사용되는 3 MHz 이하 주파수용 커넥터 — 제4부: 중앙에 1.91 mm (0.075 in) 간격의 접점과 동일 간격의 지그재그 종단을 가진 기판용Two-part 커넥터
连接器 用于频率低于3MHz用于与印制电路板用 - 第4部分:两件式连接器具有以相同的间距为1.91毫米（0.075英寸）中心和交错线端子间隔开的接触印制电路板

2020-12-30

印制板用频率低于3MHz的连接器　第1部分：总规范　一般要求和编制有质量评定的详细规范的导则
Connectors for frequencies below 3MHz for use with printed boards Part l:Generic specification—General requirements and guide for the preparation of detail specifications, with assessed quality

1994-07-26

Connectors for frequencies below 3 MHz for use with printed boards-Two-part connectors for printed boards, backpanels and cable connectors, basic grid of 2,54 mm (0,1 in)
用于印制板的频率低于3MHz的连接器 印制板、背板和电缆连接器用两件式连接器 基本网格为2.54毫米（0.1英寸）

1998-05-15

Connectors for frequencies below 3 MHz for use with printed boards -- Part 9: Two-part connectors for printed boards, backpanels and cable connectors, basic grid of 2,54 mm (0,1 in).
印制板用频率低于3MHz的连接器第9部分:基本网格为2.54mm（0.1in）的印制板、背板和电缆连接器用两件式连接器

2001-09-25

Connectors for frequencies below 3 MHz for use with printed boards-Two-part connectors for printed boards for basic grid of 2,54 mm (0,1 in), inverted type
用于印制板的频率低于3MHz的连接器 倒置式2.54毫米（0.1英寸）基本网格印制板用两件式连接器

1998-05-15

인쇄기판에 사용되는 3MHz 이하 주파수용 커넥터 — 제10부: 반전형 2.54mm(0.1in) 기본 그리드에 사용되는 인쇄기판용 암.수 커넥터
用于频率低于3 Mhz的连接器用于印刷电路板 - 第10部分:2.54 Mm（0.1 In）基本电网印刷电路板的两部分连接器 反相型

2020-12-30

인쇄 기판에 사용하는 3 MHz 미만 주파수용 커넥터 — 제5부: 간격이 2.54 mm(0.1 in)인 양면 인쇄 기판용, 에지 소켓 커넥터 및 2-part 커넥터
用于频率低于3 Mhz的连接器用于印刷电路板 - 第5部分:双面印刷电路板的边缘插座连接器和两部分连接器 带2.54 Mm（0.1 In）间距

2014-12-09

Connectors for frequencies below 3 MHz for use with printed boards - Part 5: Edge-socket connectors and two-part connectors for double-sided printed boards with 2,54 mm (0,1 in) spacing
用于印制板使用频率低于3 MHz的连接器 - 第5部分:2.54 mm（0.1 in）间距的双面印制板的边缘插座连接器和两件式连接器

1987-01-01

인쇄 기판에 사용하는 3 MHz 미만 주파수용 커넥터 — 제5부: 간격이 2.54 mm(0.1 in)인 양면 인쇄 기판용, 에지 소켓 커넥터 및 2-part 커넥터
印制板用频率低于3MHz的连接器第5部分:2.54mm（0.1in）间距双面印制板用边缘插座连接器和两件式连接器

2014-12-09

CONNECTORS FOR FREQUENCIES BELOW 3 MHZ FOR USE WITH PRINTED BOARDS. PART 5: EDGE-SOCKET CONNECTORS AND TWO-PART CONNECTORS FOR DOUBLE-SIDED PRINTED BOARDS WITH 2,54 MM (0,1 IN) SPACING.
用于印制板的频率低于3MHz的连接器 第5部分:间距为2.54毫米（0.1英寸）的双面印制板用边缘插座连接器和两件式连接器

1999-09-21

Connectors for frequencies below 3 MHz for use with printed boards-Edge-socket connectors and two-part connectors for double-sided printed boards with 2,54 mm (0,1 mm) spacing
用于印制板的频率低于3MHz的连接器 间距为2.54mm（0.1mm）的双面印制板用边缘插座连接器和两件式连接器

1998-05-15

频率低于3MHz的印制板用连接器 第11部分：同轴连接器 （自由连接器和固定连接器尺寸）详细规范
Connectors for frequencies below 2MHz for use with printed boards - Parts 11:Detail specification for concentric connectors (dimensions for free connectors and fixed connectors)

2016-01-15

인쇄 기판에 사용하는 3 MHz 미만 주파수용 커넥터 — 제6부: 공칭 두께가 1.6 mm(0.063 in)인 단면/양면 인쇄 기판용 에지 소켓 커넥터 및 인쇄 기판 커넥터[접점 간격 2.54 mm(0.1 in)]
连接器下面3MHz的印制板用频率 第6部分:边缘插座连接器和印刷电路板连接器 带（在0.063）2.54毫米（0.1英寸）的接触间距为1.6mm的单面或双面印刷电路板标称厚度

2014-12-09

Connectors for frequencies below 3 MHz for use with printed boards - Part 6: Edge socket connectors and printed board connectors with 2,54 mm (0,1 in) contact spacing for single or double-sided printed boards of 1,6 mm (0,063 in) nominal thickness
频率低于3 MHz的连接器用于印刷电路板 - 第6部分:边缘插座连接器和印刷电路板连接器 具有1,64 mm（0,063）单面或双面印刷电路板的2,54 mm（0,1 in）接触间距in）公称厚度

1987-01-01

인쇄 기판에 사용하는 3 MHz 미만 주파수용 커넥터 — 제6부: 공칭 두께가 1.6 mm(0.063 in)인 단면/양면 인쇄 기판용 에지 소켓 커넥터 및 인쇄 기판 커넥터[접점 간격 2.54 mm(0.1 in)]
印制板用频率低于3MHz的连接器第6部分:标称厚度为1.6mm（0.063in）的单面或双面印制板用2.54mm（0.1in）触点间距的边缘插座连接器和印制板连接器

2014-12-09

Connectors for frequencies below 3 MHz for use with printed boards -- Part 6: Edge-socket connectors and printed-board connectors with 2,54 mm (0,1 in) contact spacing for single or double-sided printed boards of 1,6 mm (0,063 in) nominal thickness.
印制板用频率低于3MHz的连接器第6部分:标称厚度为1.6mm（0063in）的单面或双面印制板用接触间距为2.54mm（0.1in）的边缘插座连接器和印制板连接器

2001-09-21

Connectors for frequencies below 3 MHz for use with printed boards - Part 11: Detail specification for concentric connectors (dimensions for free connectors and fixed connectors)
频率低于3 MHz的连接器用于印刷电路板 - 第11部分:同心连接器的详细规格（自由连接器和固定连接器的尺寸）

1992-03-15

Connectors for frequencies below 3 MHz for use with printed boards-Two-part connectors for printed boards having contacts spaced at 1,91 mm (0,075 in) centres and staggered terminations at that same spacing
用于印制板的频率低于3MHz的连接器 印制板用两件式连接器 其触点间距为1.91毫米（0075英寸） 交错终端间距相同

1998-05-15

Connectors for frequencies below 3 MHz for use with printed boards-Two-part connectors for printed boards having contacts spaced at 2,54 mm (0,100 in) centres and staggered terminations at that same spacing
用于印制板的频率低于3MHz的连接器 印制板用两件式连接器 触点中心间距为2.54毫米（0100英寸） 且交错终端间距相同

1998-11-15

Connectors for frequencies below 3 MHz for use with printed boards - Part 3: Two-part connectors for printed boards having contacts spaced at 2,54 mm (0,100 in) centres and staggered terminations at that same spacing
频率低于3 MHz的连接器用于印刷电路板 - 第3部分:印刷电路板的两部分连接器 具有间隔2,54 mm（0,100 in）中心的接触点和间隔相同的交错终端

1987-01-01