首页 馆藏资源 舆情信息 标准服务 科研活动 关于我们
现行 IEC 60953-3:2022
到馆阅读
收藏跟踪
购买正版
Rules for steam turbine thermal acceptance tests - Part 3: Thermal performance verification tests of retrofitted steam turbines 汽轮机热验收试验规则第3部分:改装汽轮机的热性能验证试验
发布日期: 2022-07-20
IEC 60953-3:20 22本部分建立了改装汽轮机热验证试验的补充标准。 本文件中给出的规则遵循IEC 60953-0中给出的指南,但包含关于保证和通过改装汽轮机热验收试验验证保证的修正和补充。 本文件给出了验证试验的准备、性能、评估、与保证值的比较以及确定测量不确定度的一般原则。 本文件仅适用于改造涉及汽轮机设备的某些硬件变更时。相反,对循环的任何修改或发电厂其他设备(如锅炉、给水加热器等)的任何改造。)不在本文件的范围内。
IEC 60953-3:2022 This part establishes a Supplementary Standard for thermal verification tests of retrofitted steam turbines.
The rules given in this document follow the guidance given in IEC 60953-0, but contain amendments and supplements regarding guarantees and verification of the guarantees by thermal acceptance tests on retrofitted steam turbines.
General principles for the preparation, performance, evaluation, comparison with guaranteed values and the determination of the measurement uncertainties of verification tests are given in this document.
This document is applicable only when the retrofit involves some hardware change in the steam turbine equipment. Conversely, any modification on the cycle or any retrofit of other equipment of the power plant (e.g. boiler, feedwater heaters, etc.) is not covered by this document.
分类信息
关联关系
研制信息
归口单位: TC 5
相似标准/计划/法规
现行
GB/T 8117.3-2014
汽轮机热力性能验收试验规程 第3部分:方法C 改造汽轮机的热力性能验证试验
Rules for steam turbine thermal acceptance test―Part 3: Method C―Thermal performance verification tests of retrofitted steam turbines
2014-12-22
现行
GB/T 8117.4-2017
汽轮机热力性能验收试验规程 第4部分:方法D 汽轮机及其热力循环简化性能试验
Rules for steam turbine thermal acceptance test—Part 4: Method D—Simplified performance test rules for steam turbine and its thermal cycle
2017-11-01
现行
BS EN 60953-1-1996
Rules for steam turbine thermal acceptance tests-High accuracy for large condensing steam turbines
汽轮机热验收试验规则
1996-06-15
现行
IEC 60953-1-1990
Rules for steam turbine thermal acceptance tests. Part 1: Method A - High accuracy for large condensing steam turbines
蒸汽轮机热接收试验规则 第1部分:方法A - 大型冷凝蒸汽轮机的高精度
1990-12-31
现行
KS B IEC 60953-1
증기 터빈의 열 인수성능 시험에 대한 규칙 제1부: 방법 A — 대형 응축 증기 터빈에 대한 높은 정확도
汽轮机热验收试验规则第1部分:方法A:大型冷凝式汽轮机的高精度
2022-12-28
现行
GB/T 8117.1-2008
汽轮机热力性能验收试验规程 第1部分: 方法A 大型凝汽式汽轮机高准确度试验
Rules for steam turbine thermal acceptance tests - Part 1: Method A - High accuracy for large condensing steam turbines
2008-07-02
现行
IEC 60953-0-2022
Rules for steam turbine thermal acceptance tests - Part 0: Wide range of accuracy for various types and sizes of turbines
汽轮机热验收试验规则第0部分:各种类型和尺寸汽轮机的大范围精度
2022-05-30
现行
GB/T 8117.2-2008
汽轮机热力性能验收试验规程 第2部分: 方法B 各种类型和容量的汽轮机宽准确度试验
Rules for steam turbine thermal acceptance tests - Part 2: Method B - Wide range of accuracy for various types and sizes of turbines
2008-07-02