BS ISO 16365-2:2014-塑料模塑和挤压用热塑性聚氨酯-国家数字标准馆

现行 BS ISO 16365-2:2014

到馆提醒

收藏跟踪

购买正版

Plastics. Thermoplastic polyurethanes for moulding and extrusion-Preparation of test specimens and determination of properties 塑料模塑和挤压用热塑性聚氨酯

发布日期： 2014-05-31

交叉引用:ISO 34-1ISO 37ISO 179-1ISO 179-2ISO 291ISO 294-1ISO 294-3ISO 294-4ISO 472ISO 527-1ISO 527-2ISO 815ISO 846ISO 868ISO 1133-2ISO 1183ISO 4649ISO 15512ISO 16365-1ISO 10350-1IEC 60093IEC 60112IEC 60243-1IEC 60250IEC 60695-11-10购买本文件时可提供的所有现行修订。

Cross References:ISO 34-1ISO 37ISO 179-1ISO 179-2ISO 291ISO 294-1ISO 294-3ISO 294-4ISO 472ISO 527-1ISO 527-2ISO 815ISO 846ISO 868ISO 1133-2ISO 1183ISO 4649ISO 15512ISO 16365-1ISO 10350-1IEC 60093IEC 60112IEC 60243-1IEC 60250IEC 60695-11-10All current amendments available at time of purchase are included with the purchase of this document.

分类信息

发布单位或类别：英国-英国标准学会

关联关系

研制信息

相似标准/计划/法规

BS ISO 16365-1-2014

Plastics. Thermoplastic polyurethanes for moulding and extrusion-Designation system and basis for specifications
塑料模塑和挤压用热塑性聚氨酯

GOST 34376.1-2017

Пластмассы. Термопластичные полиуретаны для формирования и экструзии. Часть 1. Система обозначения
塑料模塑和挤压用热塑性聚氨酯第一部分命名系统

ISO 16365-1-2014

Plastics — Thermoplastic polyurethanes for moulding and extrusion — Part 1: Designation system and basis for specifications
塑料制品；模塑和挤压用热塑性聚氨酯第1部分:命名系统和规范基础

Plastics - Thermoplastic polyurethanes for moulding and extrusion - Part 1: Designation system and basis for specifications
塑料.模塑和挤出用热塑性聚氨酯.第1部分:命名系统和规范基础

GB/T 42918.1-2023

塑料模塑和挤出用热塑性聚氨酯第1部分：命名系统和分类基础
Plastics—Thermoplastic polyurethanes for moulding and extrusion—Part 1:Designation system and basis for specifications

GOST 34376.3-2017

Пластмассы. Термопластичные полиуретаны для формования и экструзии. Часть 3. Определение содержания сложноэфирных групп
塑料模塑和挤压用热塑性聚氨酯第三部分酯基含量的测定

BS ISO 16365-3-2014

Plastics. Thermoplastic polyurethanes for moulding and extrusion-Distinction between ether and ester polyurethanes by determination of the ester group content
塑料模塑和挤压用热塑性聚氨酯

Plastics - Thermoplastic polyurethanes for moulding and extrusion - Part 2: Preparation of test specimens and determination of properties
塑料.模塑和挤出用热塑性聚氨酯.第2部分:试样制备和性能测定

GOST 34376.2-2017

Пластмассы. Термопластичные полиуретаны для формования и экструзии. Часть 2. Изготовление образцов для испытания и определение свойств
塑料 - 用于模塑和挤出的热塑性聚氨酯 - 第2部分:试样的制备和性能的测定

ISO 16365-2-2014

Plastics — Thermoplastic polyurethanes for moulding and extrusion — Part 2: Preparation of test specimens and determination of properties
塑料制品；模塑和挤压用热塑性聚氨酯第2部分:试样制备和性能测定

GB/T 42918.2-2023

塑料模塑和挤出用热塑性聚氨酯第2部分：试样制备和性能测定
Plastics—Thermoplastic polyurethanes for moulding and extrusion—Part 2: Preparation of test specimens and determination of properties

ISO 16365-3-2014

Plastics — Thermoplastic polyurethanes for moulding and extrusion — Part 3: Distinction between ether and ester polyurethanes by determination of the ester group content
塑料制品；模塑和挤压用热塑性聚氨酯第3部分:通过测定酯基含量区分乙醚和酯型聚氨酯

BS EN ISO 20028-1-2019

Plastics. Thermoplastic polyester (TP) moulding and extrusion materials-Designation system and basis for specification
塑料热塑性聚酯（TP）模塑和挤出材料

BS ISO 7792-1-1997

Plastics. Thermoplastic polyester (TP) moulding and extrusion materials. Designation system and basis for specifications
塑料热塑性聚酯（TP）模塑和挤出材料规范的命名系统和依据

BS EN ISO 20028-2-2017

Plastics. Thermoplastic polyester (TP) moulding and extrusion materials-Preparation of test specimens and determination of properties
塑料热塑性聚酯（TP）模塑和挤出材料

BS ISO 7792-2-1997

Plastics. Thermoplastic polyester (TP) moulding and extrusion materials. Preparation of test specimens and determination of properties
塑料热塑性聚酯（TP）模塑和挤出材料试样制备和性能测定

Plastics - Thermoplastic styrene-based elastomers for moulding and extrusion - Part 1: Designation system and basis for specification
塑料.模塑和挤压用热塑性苯乙烯基弹性体.第1部分:命名系统和规范基础

BS EN ISO 20029-1-2018

Plastics. Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion-Designation system and basis for specification
塑料模塑和挤压用热塑性聚酯/酯和聚醚/酯弹性体

BS ISO 14910-1-1997

Plastics. Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion. Designation system and basis for specifications
塑料模塑和挤出用热塑性聚酯/酯和聚醚/酯弹性体规范的命名系统和依据

KS M ISO 20028-1

플라스틱 — 열가소성 폴리에스테르 성형 및 압출 재료 — 제1부: 호칭 체계 및 시방의 기본
塑料 - 热塑性聚酯（tp）成型和挤出材料 - 第1部分:指定系统和规格

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统