ISO 9080:2012-塑料管道系统——用外推法测定管形热塑性材料的长期静水压强度 -国家数字标准馆

现行 ISO 9080:2012

到馆阅读

收藏跟踪

购买正版

Plastics piping and ducting systems — Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation 塑料管道系统——用外推法测定管形热塑性材料的长期静水压强度

发布日期： 2012-10-11

ISO 9080:2012规定了通过统计推断预测热塑性材料长期静水压强度的方法。该方法适用于适用温度下的所有类型热塑性塑料管。它是根据管道系统的测试数据开发的。

ISO 9080:2012 specifies a method for predicting the long-term hydrostatic strength of thermoplastics materials by statistical extrapolation. The method is applicable to all types of thermoplastics pipe at applicable temperatures. It was developed on the basis of test data from pipe systems.

分类信息

发布单位或类别：国际组织-国际标准化组织

ICS分类： 23.040.20管道部件和管道 - 塑料管

关联关系

研制信息

归口单位： ISO/TC 138/SC 5

相似标准/计划/法规

플라스틱 배관 및 덕트 시스템 — 외삽법에 의한 관 형태의 열가소성 플라스틱 소재의 장기 정수압 강도 측정
塑料管道和管道系统 - 通过外推法测定管材中热塑性塑料材料的长期静水强度

GB/T 18252-2020

塑料管道系统用外推法确定热塑性塑料材料以管材形式的长期静液压强度
Plastics piping and ducting systems — Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation

BS EN ISO 9080-2012

Plastics piping and ducting systems. Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation
塑料管道系统用外推法测定管形热塑性材料的长期静水压强度

Plastics piping systems — Multilayer pipes — Determination of long-term strength
塑料管道系统——多层管道——长期强度的测定

GB/T 40937-2021

塑料管道系统塑料复合管材和管件长期强度的测定方法
Plastic piping systems—Determination of long-term strength for plastic composite pipes and fittings

UNE-EN ISO 9080-2003

Plastics piping and ducting systems - Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation (ISO 9080:2003)
塑料管道和导管系统.用外推法测定管形热塑性材料的长期静水压强度（ISO 9080-2003）

AS/NZS 1462.29-2019

Methods of test for plastic pipes and fittings, Method 29: Plastics piping and ducting systems - Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation
塑料管道和配件的试验方法方法29:塑料管道和管道系统.用外推法测定管形热塑性材料的长期静水压强度

BS 10/30180079 DC

BS EN ISO 9080. Plastics piping and ducting systems. Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation
BS EN ISO 9080 塑料管道系统用外推法测定管形热塑性材料的长期静水压强度

BS EN 1447-2009+A1-2010

Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes. Determination of long-term resistance to internal pressure
塑料管道系统玻璃纤维增强热固性塑料（GRP）管长期抗内压性的测定

UNE-EN 1447-2009+A1-2011

Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of long-term resistance to internal pressure
塑料管道系统.玻璃纤维增强热固性塑料（GRP）管.长期耐内压性的测定

JIS K 7039-1998

Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes -- Determination of the long-term ultimate bending strain and calculation of the long-term ultimate relative ring deflection, both under wet conditions
塑料管道系统玻璃纤维增强热固性塑料（GRP）管长期极限弯曲应变的测定和潮湿条件下长期极限相对环挠度的计算

UNE-EN 1227-1998

PLASTICS PIPING SYSTEMS. GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) PIPES. DETERMINATION OF THE LONG-TERM ULTIMATE RELATIVE RING DEFLECTION UNDER WET CONDITIONS.
塑料管道系统玻璃纤维增强热固性塑料（GRP）管潮湿条件下长期极限相对环挠度的测定

BS EN 1227-1998

Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes. Determination of the long-term ultimate relative ring deflection under wet conditions
塑料管道系统玻璃纤维增强热固性塑料（GRP）管潮湿条件下长期极限相对环挠度的测定

BS EN 1225-1996

Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes. Determination of the creep factor under wet conditions and calculation of the long-term specific ring stiffness
塑料管道系统玻璃纤维增强热固性塑料（GRP）管潮湿条件下蠕变系数的确定和长期比环刚度的计算

UNE-EN 1225-1996

PLASTICS PIPING SYSTEMS. GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) PIPES. DETERMINATION OF THE CREEP FACTOR UNDER WET CONDITIONS AND CALCULATION OF THE LONG-TERM SPECIFIC RING STIFFNESS.
塑料管道系统玻璃纤维增强热固性塑料（GRP）管潮湿条件下蠕变系数的确定和长期比环刚度的计算

JIS K 7035-1998

Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes -- Determination of the creep factor under wet conditions and calculation of the long-term specific ring stiffness
塑料管道系统玻璃纤维增强热固性塑料（GRP）管潮湿条件下蠕变系数的测定和长期比环刚度的计算

BS EN 12107-1998

Plastics piping systems. Injection-moulded thermoplastics fittings, valves and ancillary equipment. Determination of the long-term hydrostatic strength of thermoplastics materials for injection moulding of piping components
塑料管道系统注塑热塑性塑料配件、阀门和辅助设备管道部件注射成型用热塑性材料长期静水压强度的测定

UNE-EN 12107-1998

PLASTICS PIPING SYSTEMS. INJECTION-MOULDED THERMOPLASTICS FITTINGS, VALVES AND ANCILLARY EQUIPMENT. DETERMINATION OF THE LONG-TERM HYDROSTATIC STRENGTH OF THERMOPLASTICS MATERIALS FOR INJECTION MOULDING OF PIPING COMPONENTS.
塑料管道系统注塑热塑性塑料配件、阀门和辅助设备管道部件注射成型用热塑性材料长期静水压强度的测定

Plastics piping systems for non-pressure underground conveyance and storage of non-potable water - Test method for determination of long-term compression strength of boxes
非饮用水的无压地下输送和储存用塑料管道系统.盒子长期抗压强度测定的试验方法

BS EN 17151-2019

Plastics piping systems for non-pressure underground conveyance and storage of non-potable water. Test method for determination of long-term compression strength of boxes
非饮用水无压地下输送和储存用塑料管道系统箱子长期抗压强度测定的试验方法

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统