现行

GOST 1759.0-1987

Болты, винты, шпильки и гайки. Технические условия
螺栓 螺丝 螺柱和螺母 规格

现行

GB/T 3103.1-2002

紧固件公差 螺栓、螺钉、螺柱和螺母
Tolerances for fasteners--Bolts，screws，studs and nuts

2002-12-05

现行

BS ISO 8992-2005

Fasteners. General requirements for bolts, screws, studs and nuts
紧固件 螺栓、螺钉、螺柱和螺母的一般要求

2005-04-27

现行

DIN 962

Bolts, screws, studs and nuts - Designations, types and finishes
螺栓、螺钉、螺柱和螺母.名称、类型和表面处理

2013-04-01

现行

KS B ISO 8992(2020 Confirm)

파스너－볼트, 스크루, 스터드 및 너트에 대한 일반 요구 사항
紧固件螺栓、螺钉、螺柱和螺母的一般要求

2005-12-20

现行

GB/T 16938-2008

紧固件 螺栓、螺钉、螺柱和螺母 通用技术条件
Fasteners - General requirements for bolts,screws,studs and nuts

2008-08-25

现行

GOST ISO 8992-2015

Изделия крепежные. Общие требования для болтов, винтов, шпилек и гаек
紧固件 螺栓 螺钉 螺柱和螺母的一般要求

2015-09-29

现行

ISO 8992-2005

Fasteners — General requirements for bolts, screws, studs and nuts
紧固件——螺栓、螺钉、螺柱和螺母的一般要求

2005-04-15

现行

BS EN ISO 225-2010

Fasteners. Bolts, screws, studs and nuts. Symbols and descriptions of dimensions
紧固件 螺栓、螺钉、螺柱和螺母 尺寸符号和说明

2012-04-30

现行

SAE AS6416

Bolts, Screws, Studs, and Nuts, Definitions for Design, Testing and Procurement
螺栓、螺钉、螺柱和螺母.设计、试验和采购的定义

2022-03-30

现行

JIS B 0143-2013

Fasteners -- Bolts, screws, studs and nuts -- Symbols and descriptions of dimensions
紧固件螺栓、螺钉、螺柱和螺母尺寸符号和说明

2013-01-01

现行

GB/T 5276-2015

紧固件 螺栓、螺钉、螺柱及螺母 尺寸代号和标注
Fasteners—Bolts, screws, studs and nuts—Symbols and descriptions of dimensions

2015-12-10

现行

ISO 225-2010

Fasteners — Bolts, screws, studs and nuts — Symbols and descriptions of dimensions
紧固件——螺栓、螺钉、螺柱和螺母——尺寸符号和说明

2010-09-24

现行

GOST 20700-1975

Болты, шпильки, гайки и шайбы для фланцевых и анкерных соединений, пробки и хомуты с температурой среды от 0 до 650 °С. Технические условия
螺栓 螺柱 螺母和垫圈 用于法兰和锚固连接 软木和轭铁 中等温度为0至650°C 规格

现行

DIN 25200

Bolts, screws, studs and nuts used in rail vehicle construction - Summary
轨道车辆用螺钉、螺栓和螺母.概述

1997-01-01

现行

JB/T 9151.1-1999

紧固件测试方法 尺寸与几何精度 螺栓、螺钉、螺柱和螺母
Method of verification for fastenes-Size and geometry-Bolts,screws,studs and nuts

1999-06-28

现行

BS EN ISO 4759-1-2001

Tolerances for fasteners-Bolts, screws, studs and nuts. Product grades A, B and C
紧固件的公差 螺栓、螺钉、螺柱和螺母 产品等级A、B和C

2001-02-15

现行

DIN ISO 8992

Fasteners - General requirements for bolts, screws, studs and nuts (ISO 8992:2005)
紧固件.螺栓 螺钉 螺柱和螺母的一般要求（ISO 8992-2005）

2005-09-01

现行

AS 2528-1982[ Pending Revision ]

Bolts, studbolts and nuts for flanges and other high and low temperature applications
法兰和其他高温和低温应用的螺栓、双头螺栓和螺母

1982-03-14

现行

AS 5066-2002

Tolerances for ISO metric bolts, screws, studs and nuts - Product grades A, B and C
ISO公制螺栓、螺钉、螺柱和螺母的公差.产品等级A、B和C

2002-09-27