BS PD CEN/TS 14578:2013-供水、排水和排污用塑料管道系统基于不饱和聚酯树脂（UP）的玻璃纤维增强热固性塑料（GRP）安装推荐规程-国家数字标准馆

现行 BS PD CEN/TS 14578:2013

到馆提醒

收藏跟踪

购买正版

Plastics piping systems for water supply or drainage and sewerage. Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP). Recommended practice for installation 供水、排水和排污用塑料管道系统基于不饱和聚酯树脂（UP）的玻璃纤维增强热固性塑料（GRP）安装推荐规程

发布日期： 2013-12-31

交叉引用:EN 805EN 1610EN 1796:2013EN 14364:2013ISO/TS 10465-1:2007CEN/TS 14807ISO 10467ISO 10639ISO/TR 10986购买本文件时提供的所有当前修订版均包含在购买本文件中。

Cross References:EN 805EN 1610EN 1796:2013EN 14364:2013ISO/TS 10465-1:2007CEN/TS 14807ISO 10467ISO 10639ISO/TR 10986All current amendments available at time of purchase are included with the purchase of this document.

分类信息

发布单位或类别：英国-英国标准学会

关联关系

研制信息

相似标准/计划/法规

BS EN 12201-2-2011+A1-2013

Plastics piping systems for water supply, and for drainage and sewerage under pressure. Polyethylene (PE)-Pipes
供水、排水和污水加压用塑料管道系统聚乙烯（PE）

BS EN 12201-3-2011+A1-2012

Plastics piping systems for water supply, and for drainage and sewerage under pressure. Polyethylene (PE)-Fittings
供水、排水和污水加压用塑料管道系统聚乙烯（PE）

BS EN 12201-4-2012

Plastics piping systems for water supply, and for drainage and sewerage under pressure. Polyethylene (PE)-Valves
供水、排水和污水加压用塑料管道系统聚乙烯（PE）

BS EN 12201-1-2011

Plastics piping systems for water supply, and for drainage and sewerage under pressure. Polyethylene (PE)-General
供水、排水和污水加压用塑料管道系统聚乙烯（PE）

ISO 4427-2-2019

Plastics piping systems for water supply, and for drainage and sewerage under pressure — Polyethylene (PE) — Part 2: Pipes
供水塑料管道系统 - 聚乙烯（pe） - 第2部分:管道

BS EN 12201-5-2011

Plastics piping systems for water supply, and for drainage and sewerage under pressure. Polyethylene (PE)-Fitness for purpose of the system
供水、排水和污水加压用塑料管道系统聚乙烯（PE）

ISO 4427-1-2019

Plastics piping systems for water supply and for drainage and sewerage under pressure — Polyethylene (PE) — Part 1: General
塑料管道系统供水和排水和下水道压力 - 聚乙烯（pe） - 第1部分:一般

ISO 4427-3-2019

Plastics piping systems for water supply, and for drainage and sewerage under pressure — Polyethylene (PE) — Part 3: Fittings
塑料管道系统供水和排水和下水道压力 - 聚乙烯（pe） - 第3部分:配件

Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 4: Valves
供水、排水和污水加压用塑料管道系统.聚乙烯（PE）.第4部分:阀门；德文版EN 12201-4:2012

BS PD CEN/TS 12201-7-2014

Plastics piping systems for water supply, and for drainage and sewerage under pressure. Polyethylene (PE)-Guidance for the assessment of conformity
供水、排水和污水加压用塑料管道系统聚乙烯（PE）合格评定指南

ISO 4427-2-2019/Amd 1-2023

Plastics piping systems for water supply, and for drainage and sewerage under pressure — Polyethylene (PE) — Part 2: Pipes — Amendment 1
供水、排水和污水处理用塑料管道系统.聚乙烯（PE）.第2部分:管道.修改件1

ISO 4427-5-2019

Plastics piping systems for water supply, and for drainage and sewerage under pressure — Polyethylene (PE) — Part 5: Fitness for purpose of the system
塑料管道系统供水和排水和下水道压力 - 聚乙烯（Pe） - 第5部分:适用于系统目的

BS EN ISO 1452-2-2009

Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure. Unplasticized poly(vinyl chloride) (PVC U)-Pipes
供水、埋地和地上压力排水和排污用塑料管道系统未增塑聚氯乙烯（PVC U）

Plastics piping systems for pressure and non-pressure water supply, drainage or sewerage — Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin
压力和非压力供水、排水或排水用塑料管道系统.基于不饱和聚酯（UP）树脂的玻璃增强热固性塑料（GRP）系统

BS EN ISO 23856-2021

Plastics piping systems for pressure and non-pressure water supply, drainage or sewerage. Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin
压力和非压力供水、排水或排污用塑料管道系统基于不饱和聚酯（UP）树脂的玻璃纤维增强热固性塑料（GRP）系统

DIN SPEC 19674-2

Plastics piping systems made from glass fibre reinforced polyethylene (PE-GF) for water supply and for drainage and sewerage under pressure - Part 2: Pipes
供水、排水和污水加压用玻璃纤维增强聚乙烯（PE-GF）塑料管道系统第2部分:管道

UNE-CEN/TS 14578-2005 EX

Plastics piping systems for water supply or drainage and sewerage. Glass-reinforced thermosetting plastics (GPR) based on unsaturated polyester resin (UP). Recommended practice for installation.
供水、排水和排污用塑料管道系统基于不饱和聚酯树脂（UP）的玻璃纤维增强热固性塑料（GPR）安装的推荐做法

ISO 1452-2-2009

Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure — Unplasticized poly(vinyl chloride) (PVC-U) — Part 2: Pipes
供水、埋地和地上压力排水和污水用塑料管道系统——未增塑聚氯乙烯（PVC-U）第2部分:管道

BS EN ISO 1452-3-2010

Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure. Unplasticized poly(vinyl chloride) (PVC-U)-Fittings
供水、埋地和地上压力排水和排污用塑料管道系统未增塑聚氯乙烯（PVC-U）

BS EN ISO 1452-1-2009

Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure. Unplasticized poly(vinyl chloride) (PVC U)-General
供水、埋地和地上压力排水和排污用塑料管道系统未增塑聚氯乙烯（PVC U）

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统