首页 馆藏资源 舆情信息 标准服务 科研活动 关于我们
现行 DIN 54836
到馆提醒
收藏跟踪
购买正版
Testing of combustible materials; determination of ignition temperature 可燃材料的测试;点火温度的测定
发布日期: 1984-02-01
分类信息
发布单位或类别: 德国-德国标准化学会
关联关系
研制信息
相似标准/计划/法规
现行
DIN 53438-3
Testing of combustible materials; response to ignition by a small flame; surface ignition
可燃材料的测试;对小火焰点火的反应;表面点火
1984-06-01
现行
DIN 53438-2
Testing of combustible materials; response to ignition by a small flame; edge ignition
可燃材料的测试;对小火焰点火的反应;边缘点火
1984-06-01
现行
BS EN 50281-2-1-1999
Electrical apparatus for use in the presence of combustible dust. Test methods-Methods of determining minimum ignition temperatures
存在可燃性粉尘时使用的电气设备 测试方法
1999-05-15
现行
GB/T 9343-2008
塑料燃烧性能试验方法 闪燃温度和自燃温度的测定
Test method for flammability of plastics - Determination of flash-ignition temperature and self-ignition temperature
2008-06-30
现行
DIN 53438-1
Testing of combustible materials; response to ignition by a small flame; general data
可燃材料的测试;对小火焰点火的反应;一般数据
1984-06-01
现行
ASTM D1929-23
Standard Test Method for Determining Ignition Temperature of Plastics
测定塑料点燃温度的标准试验方法
2023-05-01
现行
DIN 51081
Testing of oxidic raw materials and materials - Determination of change in mass on ignition
氧化原材料和材料的试验.着火时质量变化的测定
2002-12-01
现行
UNE-EN 50281-2-1-1999
ELECTRICAL APPARATUS FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST. PART 2-1: TEST METHODS - METHODS FOR DETERMINING THE MINIMUM IGNITION TEMPERATURES OF DUST
存在可燃性粉尘时使用的电气设备 第2-1部分:试验方法-测定粉尘最低点火温度的方法
1999-11-29
现行
GOST IEC 61241-2-1-2011
Электрооборудование, применяемое в зонах, опасных по воспламенению горючей пыли. Часть 2. Методы испытаний. Раздел 1. Методы определения температуры самовоспламенения горючей пыли
用于存在可燃粉尘的电气设备 测试方法 第1节确定灰尘最低点火温度的方法
2011-12-22
现行
UNE 22330-1992
COAL DUST EXPLOSIBILITY. TEST METHOD FOR DETERMINING THE MINIMUM IGNITION TEMPERATURE IN A LAYER.
煤尘爆炸性 测定一层中最低点火温度的试验方法
1992-07-08
现行
UNE 22334-1990
COAL DUST EXPLOSIBILITY. TEST METHOD FOR DETERMINING THE MINIMUM IGNITION TEMPERATURE IN A CLOUD
煤尘爆炸性 测定云中最低点火温度的试验方法
1990-05-18
现行
GB/T 7702.9-2008
煤质颗粒活性炭试验方法 着火点的测定
Test method for granular activated carbon from coal - Determination of ignition temperature
2008-02-01
现行
BS 6043-2.21.1-2001
Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke. Air reactivity of calcined coke-Determination of the reactivity by determination of ignition temperature-Section 2.21: Air reactivity of calcined coke Subsection 2.21.1: Determination of the reactivity by determination of ignition temperature
铝制造用碳质材料的取样和试验方法 电极焦 煅烧焦炭的空气反应性
2001-07-15
现行
ASTM E1321-18
Standard Test Method for Determining Material Ignition and Flame Spread Properties
用于确定材料点火和火焰蔓延性能的标准测试方法
2018-11-01
现行
ASTM G144-01(2022)
Standard Test Method for Determination of Residual Contamination of Materials and Components by Total Carbon Analysis Using a High Temperature Combustion Analyzer
用高温燃烧分析仪进行总碳分析测定材料和部件残余污染的标准试验方法
2022-09-01
现行
GB/T 14402-2007
建筑材料及制品的燃烧性能 燃烧热值的测定
Reaction to fire tests for building materials and products - Determination of the heat of combustion
2007-12-21
现行
ISO 12982-1-2000
Carbonaceous materials used in the production of aluminium — Calcined coke — Determination of the reactivity to air — Part 1: Ignition temperature method
用于铝生产的碳质材料——煅烧焦炭和粉煤灰;空气反应性的测定第1部分:点火温度法
2000-12-21
现行
BS EN IEC 60695-2-13-2021
Fire hazard testing-Glowing/hot-wire based test methods. Glow-wire ignition temperature (GWIT) test method for materials
火灾危险测试
2021-10-13
现行
ASTM D7668-23
Standard Test Method for Determination of Derived Cetane Number (DCN) of Diesel Fuel Oils—Ignition Delay and Combustion Delay Using a Constant Volume Combustion Chamber Method
用定容燃烧室法测定柴油十六烷值(DCN)的标准试验方法——点火延迟和燃烧延迟
2023-10-01
现行
NB/SH/T 6035-2021
柴油导出十六烷值的测定 定容燃烧室着火滞后和燃烧滞后法
Standard test method for determination of derived cetane number (DCN) of diesel fuel oils—Ignition delay and combustion delay using a constant volume combustion chamber method
2021-11-16