BS EN 61000-4-2:2009涉及电气设备的抗扰度要求和试验方法 以及直接由操作员排放静电的电子设备， 从人员到邻近物体。它还定义了测试级别的范围 与不同的环境和安装条件相关，并建立测试程序。 本标准的目的是为评估 电气和电子设备在静电作用下的性能 出院。此外，它还包括可能发生在人员之间的静电放电 重要设备附近的物体。BS EN 61000-4-2:2009定义:-放电电流的典型波形； -测试级别范围；-测试设备；-测试设置；-测试程序；-校准程序；-测量不确定度。BS EN 61000-4-2:2009给出了在“实验室”中进行的试验以及在最终安装中对设备进行的“安装后试验”的规范。BS EN 61000-4-2:2009不打算规定适用于特定仪器或设备的试验 系统。其主要目的是为所有相关产品提供一般的基本参考 独立选举委员会的委员会。产品委员会（或设备的用户和制造商） 继续负责测试的适当选择和应用的严重程度 他们的装备。为了不妨碍协调和标准化工作，产品委员会或 强烈建议用户和制造商（在今后的工作中） 修订旧标准）采用本标准中规定的相关免疫试验 标准交叉引用:IEC 60050-161IEC 60068-1EN 60068-1:1994IEC 60050-311IEC 61000-6-1IEC指南107EN 61000-6-1:2007取代了BS EN 61000-4-2:1995，该指南仍为现行版本。购买本文件时可获得的所有当前修订均包含在购买本文件中。

BS EN 61000-4-2:2009 relates to the immunity requirements and test methods for electrical and electronic equipment subjected to static electricity discharges, from operators directly, and from personnel to adjacent objects. It additionally defines ranges of test levels which relate to different environmental and installation conditions and establishes test procedures. The object of this standard is to establish a common and reproducible basis for evaluating the performance of electrical and electronic equipment when subjected to electrostatic discharges. In addition, it includes electrostatic discharges which may occur from personnel to objects near vital equipment.BS EN 61000-4-2:2009 defines:- typical waveform of the discharge current;- range of test levels;- test equipment;- test setup;- test procedure;- calibration procedure;- measurement uncertainty.BS EN 61000-4-2:2009 gives specifications for test performed in "laboratories" and "post-installation tests" performed on equipment in the final installation.BS EN 61000-4-2:2009 does not intend to specify the tests to be applied to particular apparatus or systems. Its main aim is to give a general basic reference to all concerned product committees of the IEC. The product committees (or users and manufacturers of equipment) remain responsible for the appropriate choice of the tests and the severity level to be applied to their equipment.In order not to impede the task of coordination and standardization, the product committees or users and manufacturers are strongly recommended to consider (in their future work or revision of old standards) the adoption of the relevant immunity tests specified in this standard.Cross References:IEC 60050-161IEC 60068-1EN 60068-1:1994IEC 60050-311IEC 61000-6-1IEC Guide 107EN 61000-6-1:2007Replaces BS EN 61000-4-2:1995 which remains current.All current amendments available at time of purchase are included with the purchase of this document.