本文件规定了适用于固定式、浮动式和浮动式的要求和建议 石油和天然气工业及结构物用接地混凝土海洋结构物 支持国家重要的发电、输电或配电设施。这份文件 特别针对 –新结构的设计、施工、运输和安装，包括要求 对于在役检查和可能的结构拆除，评估在役结构，以及评估在其他位置重复使用的结构。 本文件旨在涵盖主要工程设计所需的工程过程 建立海上作业设施的纪律。交叉引用:ISO 19901-1ISO 19901-8ISO 19901-3ISO 19904-1ISO 19901-5ISO 19901-4ISO 19901-2ISO 19900ISO 19901-6ISO 16204ISO 19906ISO 19902ISO 22966ISO 4463- ISO 19905（所有部分）ISO 22965-2EMUA 207API Std 2000ISO 6934（所有部分）ISO 1920-3ISO 6935（所有部分）ISO 12696 2016ISO 13702NS 3473。EISO 20257-1ISO/IEC/IEEE 90003DNV-RP-C207EN 14620-3ACI 376ISO 1920-4ISO 19901-9ISO 19901-10ISO 19901-7EN 1992-1-1:2004购买本文件时可获得的所有现行修订均包含在购买本文件中。

This document specifies requirements and provides recommendations applicable to fixed, floating and grounded concrete offshore structures for the petroleum and natural gas industries and for structures supporting nationally-important power generation, transmission or distribution facility. This document specifically addresses – the design, construction, transportation and installation of new structures, including requirements for in-service inspection and possible removal of structures,– the assessment of structures in service, and– the assessment of structures for reuse at other locations. This document is intended to cover the engineering processes needed for the major engineering disciplines to establish a facility for offshore operation.Cross References:ISO 19901-1ISO 19901-8ISO 19901-3ISO 19904-1ISO 19901-5ISO 19901-4ISO 19901-2ISO 19900ISO 19901-6ISO 16204ISO 19906ISO 19902ISO 22966ISO 4463-1ISO 19905 (all parts)ISO 22965-2EEMUA 207API Std 2000ISO 6934 (all parts)ISO 1920-3ISO 6935 (all parts)ISO 12696 2016ISO 13702NS 3473.EISO 20257-1ISO/IEC/IEEE 90003DNV-RP-C207EN 14620-3ACI 376ISO 1920-4ISO 19901-9ISO 19901-10ISO 19901-7EN 1992-1-1:2004All current amendments available at time of purchase are included with the purchase of this document.