BS EN 13253:2016规定了土工布和土工布相关材料的相关特性 用于侵蚀控制工程的产品，用于防止细级配材料迁移到地层中 由于交替水力梯度而产生的较粗材料，以及适当的试验方法 确定这些特征。本欧洲标准涵盖海岸保护和护岸的应用。这个欧洲人 本标准不包括土工布或土工布相关产品所在地的表面侵蚀 表面。这些土工布或土工布相关产品的预期用途是满足以下一项或多项要求: 以下功能:过滤、分离和强化。分离功能将始终出现 与过滤或加固结合使用，因此不会单独指定。本欧洲标准不适用于EN ISO 10318-1中定义的土工合成屏障。本欧洲标准规定了对设备性能稳定性的评估和验证 该产品符合本欧洲标准和工厂生产控制程序。特定应用案例可能包含关于附加属性的要求，最好是 标准化——测试方法，如果技术相关。本欧洲标准可用于通过考虑以下因素得出设计值: EN 1997-1（欧洲法规7）中给出的定义的上下文，例如安全系数。设备的设计寿命 应确定产品，因为其功能可能是暂时的，作为施工权宜之计，或 永久性，适用于结构的使用寿命。参考资料:EN 1222424EN 1222424EN 1222424EN 1222424EN 1222424EN 1222424EN 1222424EN 122242424EN 122242424EN EN ISO 3696ISO 3696ISO 3696ISO 3696ISO 3696ISO 3696ISO 3696ISO 3696ISO 3696ISO 36ISO 36ISO 36ISO 3696ISO 3696ISO 36ISO 36ISO 36ISO 3696ISO 36ISO 3696ISO 3696ISO 3696ISO 3696ISO 3696ISO 3696ISO 3696ISO 3696ISO 3696ISO 3696ISO 3696ISO 3696ISO 3696ISO 3696ISO 3696ISO 3696ISO 3696ISO 3696ISO 3696ISO 36ISO 3696ISO 3696ISO 3696ISO 3696ISO 3696ISO 3696ISO 3696ISO 3696ISO 3696ISO 3696ISO 3696ISO 3696ISO 3696ISO 3696ISO 3696ISO 3696ISO 3696ISO 3696ISO 3696ISO 3696ISO 366 ISO 366 ISO 366 ISO 366 ISO 3696ISO 366 ISO 366 ISO 36ISO 36ISO 36ISO 36366-2EN ISO 13431ISO 13431ENISO 13433ISO 13433EN ISO 13438ISO 13438ISO 10390ASTM D4603-03（2011）e1ASTM D7409-15EN 1997-1EN 12225EN 13249EN 13250EN 13251EN 13252EN 13254EN 13255EN 13256EN 13257EN 13265EN 14030ISO/TR 12960:1998CEN/TR 15019EN ISO 9001EN ISO 14021ISO/TS 13434购买本文件时提供的所有当前修订版均包括在内。

BS EN 13253:2016 specifies the relevant characteristics of geotextiles and geotextile-related products used in erosion control works for preventing the migration of fine-graded material into layers of coarser material due to alternating hydraulic gradients, and the appropriate test methods to determine these characteristics.This European Standard covers applications in coastal protection and bank revetment. This European Standard does not cover surface erosion, where the geotextile or geotextile-related product is located at the surface.The intended use of these geotextiles or geotextile-related products is to fulfil one or more of the following functions: filtration, separation and reinforcement. The separation function will always occur in conjunction with filtration or reinforcement, and hence will not be specified alone.This European Standard is not applicable to geosynthetic barriers, as defined in EN ISO 10318-1.This European Standard provides for the assessment and verification of constancy of performance of the product to this European Standard and for factory production control procedures.Particular application cases may contain requirements regarding additional properties and - preferably standardized - test methods, if they are technically relevant.This European Standard may be used to derive design values by taking into account factors within the context of the definitions given in EN 1997-1 (Eurocode 7), e.g. factors of safety. The design life of the product should be determined, since its function may be temporary, as a construction expediency, or permanent, for the lifetime of the structure.Cross References:EN 12224EN 12226EN 12447EN ISO 1043-1ISO 1043-1EN ISO 3696ISO 3696EN ISO 9862ISO 9862EN ISO 10318-1ISO 10318-1EN ISO 10319ISO 10319EN ISO 10320ISO 10320EN ISO 10321ISO 10321EN ISO 10722ISO 10722EN ISO 11058ISO 11058EN ISO 12236ISO 12236EN ISO 12956ISO 12956EN ISO 12957-1ISO 12957-1EN ISO 12957-2ISO 12957-2EN ISO 13426-1ISO 13426-1EN ISO 13426-2ISO 13426-2EN ISO 13431ISO 13431EN ISO 13433ISO 13433EN ISO 13438ISO 13438ISO 10390ASTM D4603-03(2011)e1ASTM D7409-15EN 1997-1EN 12225EN 13249EN 13250EN 13251EN 13252EN 13254EN 13255EN 13256EN 13257EN 13265EN 14030ISO/TR 12960:1998CEN/TR 15019EN ISO 9001ISO 9001EN ISO 14021ISO 14021ISO/TS 13434All current amendments available at time of purchase are included with the purchase of this document.