首页 馆藏资源 舆情信息 标准服务 科研活动 关于我们
现行 SAE AMS7018
到馆提醒
收藏跟踪
购买正版
Aluminum Alloy Powder 10.0Si - 0.35Mg 铝合金粉末10.0Si-0.35Mg
发布日期: 2020-05-11
本规范涵盖预合金粉末形式的铝合金。
This specification covers an aluminum alloy in the form of pre-alloyed powder.
分类信息
关联关系
研制信息
相似标准/计划/法规
现行
MIL MIL-DTL-454A
MAGNESIUM - ALUMINUM ALLOY, POWDERED
镁铝合金粉末
2020-01-22
现行
SAE AMS4218J
Aluminum Alloy Castings 7.0Si - 0.35Mg (A356.0-T6) (Formerly T6P Temper) Solution and Precipitation Heat Treated
铝合金铸件7.0Si-0.35Mg(A356.0-T6)(原T6P回火)固溶和沉淀热处理
2015-10-29
现行
YS/T 529-2009
吸气用锆铝合金粉
Zironium-Aluminum alloy powder for getter
2009-12-04
现行
SAE AMS7020
Aluminum Alloy Powder 7.0Si - 0.55Mg - 0.12Ti
铝合金粉末7.0Si-0.55Mg-0.12Ti
2021-11-09
现行
SAE AMS4450
Aluminum Alloy, Extruded Profiles (2043-T85) 2.8Cu - 1.65Li - 0.35Mg - 0.1Zr Solution Heat Treated, Stress Relieved by Stretching, and Aged
铝合金 挤压型材(2043-T85)2.8Cu-1.65Li-0.35Mg-0.1Zr固溶热处理 拉伸消除应力 时效
2019-07-03
现行
YS/T 617.9-2007
铝、镁及其合金粉理化性能测定方法 第9部分:铝粉附着率的测定
Determination of chemical compositions and physical properties of aluminum powder,magnesium powder and Al-Mg alloy powder—Part 9:Determination of adhesion ratio of aluminum powder
2007-04-13
现行
YS/T 617.5-2007
铝、镁及其合金粉理化性能测定方法 第5部分:铝粉中油脂含量的测定
Determination of chemical compositions and physical properties of aluminum powder,magnesium powder and Al-Mg alloy powder—Part 5:Determination of grease content of aluminum powder
2007-04-13
现行
YS/T 617.10-2007
铝、镁及其合金粉理化性能测定方法 第10部分:铝粉盖水面积的测定
Determination of chemical compositions and physical properties of aluminum powder,magnesium powder and Al-Mg alloy powder—Part 10:Determination of coating surface of aluminum powder
2007-04-13
现行
YS/T 617.2-2007
铝、镁及其合金粉理化性能测定方法 第2部分:铝镁合金粉中铝含量的测定 氟化物置换络合滴定法
Determination of chemical compositions and physical properties of aluminum powder,magnesium powder and Al-Mg alloy powder—Part 2:Determination of aluminum content of Al-Mg alloy powders—Fluoride replacement-complexometric method
2007-04-13
现行
SAE AMS7033
Aluminum Alloy Powder 4.6Cu - 3.4Ti - 1.4B - 0.75Ag - 0.27Mg
铝合金粉末4.6Cu-3.4Ti-1.4B-0.75Ag-0.27Mg
2021-06-22
现行
GB/T 38972-2020
增材制造用硼化钛颗粒增强铝合金粉
TiB2 particulate reinforced aluminum alloy powder for additive manufacturing
2020-07-21
现行
GB/T 22784-2008
烟花爆竹用铝镁合金粉关键指标的测定
Determination of essential parameters of aluminum-magnesium alloy powder for use in fireworks and firecrackers
2008-12-30
现行
YS/T 617.8-2007
铝、镁及其合金粉理化性能测定方法 第8部分:松装密度的测定
Determination of chemical compositions and physical properties of aluminum powder,magnesium powder and Al-Mg alloy powder—Part 8:Determination of apparent density
2007-04-13
现行
GB/T 5237.4-2017
Wrought aluminum alloy extruded profiles for architecture—Part 4:Powder coating profiles
现行
YS/T 617.4-2007
铝、镁及其合金粉理化性能测定方法 第4部分:镁粉中盐酸不溶物量的测定 重量法
Determination of chemical compositions and physical properties of aluminum powder,magnesium powder and Al-Mg alloy powder—Part 4:Determination of insoluble content in hydrochloric acid of magnesium powder—Gravimetric method
2007-04-13
现行
YS/T 617.6-2007
铝、镁及其合金粉理化性能测定方法 第6部分:粒度分布的测定 筛分法
Determination of chemical compositions and physical properties of aluminum powder,magnesium powder and Al-Mg alloy powder—Part 6:Determination of particle size distribution—Sieve method
2007-04-13
现行
YY/T 0988.2-2016
外科植入物涂层 第2部分:钛及钛-6铝-4钒合金粉末
Coatings of surgical implants—Part 2:Titanium and titanium-6 aluminum-4 vanadium alloy powders
2016-03-23
现行
ASTM F1580-18
Standard Specification for Titanium and Titanium-6 Aluminum-4 Vanadium Alloy Powders for Coatings of Surgical Implants
外科植入物涂层用钛和钛-6铝-4钒合金粉末的标准规范
2018-11-15
现行
YS/T 617.7-2007
铝、镁及其合金粉理化性能测定方法 第7部分:粒度分布的测定 激光散射/衍射法
Determination of chemical compositions and physical properties of aluminum powder,magnesium powder and Al-Mg alloy powder—Part 7:Determination of particle size distribution—Laser scatterance/diffraction method
2007-04-13
现行
YS/T 617.3-2007
铝、镁及其合金粉理化性能测定方法 第3部分:水分的测定 干燥失重法
Determination of chemical compositions and physical properties of aluminum powder,magnesium powder and Al-Mg alloy powder—Part 3:Determination of volatile matter(water)content—Drying-degravimetric method
2007-04-13