首页 馆藏资源 舆情信息 标准服务 科研活动 关于我们
现行 ISO 18868:2013
到馆阅读
收藏跟踪
购买正版
Commercial road vehicles — Coupling equipment between vehicles in multiple vehicle combinations — Strength requirements 商用道路车辆——多车辆组合中车辆之间的耦合设备——强度要求
发布日期: 2013-06-24
ISO 18868:2013定义了不同的多车辆组合(具有多个耦合点的车辆组合)以及计算这些车辆组合中使用的耦合设备性能要求的公式。相关车辆类别包括N2、N3、O3和O4。
ISO 18868:2013 defines different multiple-vehicle combinations (vehicle combinations with more than one coupling point) and the formulae to calculate the requirement of performance for the coupling equipment used in those vehicle combinations. Vehicle categories concerned are N2, N3, O3, and O4.
分类信息
关联关系
研制信息
归口单位: ISO/TC 22/SC 40
相似标准/计划/法规
现行
GB/T 44082-2024
道路车辆 汽车列车多车辆间连接装置 强度要求
Road vehicles—Coupling equipment between vehicles in multiple vehicle combinations—Strength requirements
2024-05-28
现行
UNE 26488-1999
COMMERCIAL ROAD VEHICLES. MECHANICAL COUPLING BETWEEN TOWING VEHICLES WITH REAR-MOUNTED COUPLING AND DRAWBAR TRAILERS. INTERCHANGEABILITY.
商用道路车辆 带后置联轴节的牵引车和牵引挂车之间的机械联轴节 互换性
1999-09-15
现行
ISO 11406-2001
Commercial road vehicles — Mechanical coupling between towing vehicles with rear-mounted coupling and drawbar trailers — Interchangeability
商用道路车辆——带后置联轴节的牵引车与牵引挂车之间的机械联轴节——互换性
2001-05-10
现行
ISO 7653-1985
Road vehicles — Commercial vehicles — Couplings between power take-offs (PTO) and ancillary driven units
道路车辆——商用车——动力输出(PTO)和辅助驱动装置之间的联轴器
1985-02-28
现行
KS R ISO 7653(2020 Confirm)
도로 차량 — 상용차 — 동력 인출 장치(PTO)와 보조 피동 장치 간의 커플링
道路车辆 - 商业车辆 - 动力起飞(pto)和辅助驱动单元之间的联轴器
2015-10-01
现行
UNE 26228-1999
COMMERCIAL ROAD VEHICLES. MECHANICAL CONNECTIONS BETWEEN TOWING VEHICLES AND TRAILERS. 50 MM DRAWBAR COUPLING.
商用道路车辆 牵引车和拖车之间的机械连接 50毫米牵引杆联轴器
1999-11-29
现行
ISO 11407-2004
Commercial road vehicles — Mechanical coupling between towing vehicles, with coupling mounted forward and below, and centre-axle trailers — Interchangeability
商用道路车辆——牵引车之间的机械联轴节(联轴节安装在前部和下部)和中轴拖车——互换性
2004-10-29
现行
UNE 26487-1999
COMMERCIAL ROAD VEHICLES. MECHANICAL COUPLING BETWEEN TOWING VEHICLES WITH COUPLING MOUNTED FORWARD AND BELOW, AND CENTRE-AXLE TRAILERS. INTERCHANGEABILITY.
商用道路车辆 牵引车与中轴挂车之间的机械联轴节 联轴节安装在前部和下部 互换性
1999-09-15
现行
DIN ISO 11406
Commercial road vehicles - Mechanical coupling between towing vehicles with rear-mounted coupling and drawbar trailers - Interchangeability; identical with ISO 11406:1993
商用道路车辆.带后置联轴节的牵引车和牵引挂车之间的机械联轴节.互换性;与ISO 11406:1993相同
1995-03-01
现行
DIN ISO 11407
Commercial road vehicles - Mechanical coupling between towing vehicles with coupling mounted forward and below, and centre axle-trailers - Interchangeability; identical with ISO 11407:1993
商用道路车辆.前下方安装有联轴节的牵引车和中轴挂车之间的机械联轴节.互换性;与ISO 11407:1993相同
1995-03-01
现行
ISO 18868-2013/Amd 1-2020
Commercial road vehicles — Coupling equipment between vehicles in multiple vehicle combinations — Strength requirements — Amendment 1: Clarification for calculation for V-value for combinations including a centre axel trailer (CAT)
包括中轴拖车(CAT)在内的组合V值计算说明
2020-01-31
现行
DIN ISO 7653
Road vehicles, commercial vehicles; couplings between power take-offs and ancillary driven units; identical with ISO 7653, edition 1985 (status as of 1986)
道路车辆、商用车辆;取力器和辅助驱动装置之间的联轴器;与1985年版ISO 7653相同(1986年的状态)
1986-12-01
现行
AS 2213.5-2008
Commercial road vehicles - Mechanical connections between towing vehicles, Part 5: Strength tests for pin-type couplings and drawbar eyes for hinged drawbars
商用道路车辆.牵引车之间的机械连接.第5部分:铰链式牵引杆的销式联轴器和牵引杆孔的强度试验
2008-10-21
现行
AS 2213.3-2008
Commercial road vehicles - Mechanical connections between towing vehicles, Part 3: 40 mm pin-type couplings and drawbar eyes (ISO 8755:2001, MOD)
商用道路车辆.牵引车之间的机械连接.第3部分:40mm销式联轴器和挂钩孔
2008-10-21
现行
AS 2213.2-2008
Commercial road vehicles - Mechanical connections between towing vehicles, Part 2: 50 mm pin-type couplings and drawbar eyes (ISO 1102:2001, MOD)
商用道路车辆.牵引车之间的机械连接.第2部分:50mm销式连接器和牵引杆孔
2008-10-21
现行
AS 2213.4-2008
Commercial road vehicles - Mechanical connections between towing vehicles, Part 4: Strength tests for pin-type couplings and drawbar eyes for rigid drawbars (ISO 12357-1:1999, MOD)
商用道路车辆牵引车之间的机械连接第4部分:刚性牵引杆的销式联轴器和牵引杆孔的强度试验
2008-10-21