강판 및 평강의 두께 방향 특성
规格可供钢板和宽扁通厚度方向性能

1993-12-29

강판 및 평강의 두께 방향 특성
钢板和宽平板的通厚特性规范

1993-12-29

강판 및 평강의 두께 방향 특성
钢板和宽平板厚度特性规范

1993-12-29

Standard Specification for Through-Thickness Tension Testing of Steel Plates for Special Applications
钢板用于特殊应用的厚度拉伸试验标准规范

2018-09-01

Standard Welding Procedure Specification (SWPS) for Shielded Metal Arc Welding of Austenitic Stainless Steel (M-8/P-8, Group 1), 1/8 inch [3 mm] through 1-1/2 inch [38 mm] Thick, As-Welded Condition, Primarily Plate and Structural Applications
1/8英寸[3 mm]至1-1/2英寸[38 mm]厚的焊态奥氏体不锈钢（M-8/P-8 第1组）的保护金属电弧焊标准焊接工艺规范（SWPS） 主要用于板材和结构应用

2018-04-10

Standard Welding Procedure Specification for Naval Applications (SWPS-N) for Gas Tungsten Arc Welding of Austenitic Stainless Steel (S-8), 1/8 inch [3 mm] through 1-1/2 inch [38 mm] Thick, MIL-3XX, in the As-Welded Condition, Primarily Plate and Structural Naval Applications
1/8英寸[3毫米]至1-1/2英寸[38毫米]厚的MIL-3XX奥氏体不锈钢（S-8）焊态钨极气体保护焊海军应用标准焊接工艺规范（SWPS-N） 主要用于板材和结构海军应用

2016-01-01

Standard Welding Procedure Specification (SWPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1, Group 1 or 2), 1/8 inch [3 mm] through 1-1/2 inch [38 mm] Thick, E6010 (Vertical Downhill) Followed by E7018, As-Welded or PWHT Condition, Primarily Plate and Structural Application
1/8英寸[3 mm]至1-1/2英寸[38 mm]厚E6010（垂直下坡）和E7018焊态或焊后热处理条件下碳钢（M-1/P-1 第1组或第2组）的保护金属极电弧焊标准焊接工艺规范（SWPS） 主要用于板材和结构应用

2018-04-10

Standard Welding Procedure Specification (SWPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1, Group 1 or 2), 1/8 inch [3 mm] through 1-1/2 inch [38 mm] Thick, E6010 (Vertical Downhill) Followed by E7018, As-Welded or PWHT Condition, Primarily Plate and Structural Application
1/8英寸[3 mm]至1-1/2英寸[38 mm]厚E6010（垂直下坡）和E7018焊态或焊后热处理条件下碳钢（M-1/P-1 第1组或第2组）的保护金属极电弧焊标准焊接工艺规范（SWPS） 主要用于板材和结构应用

2018-04-10