请注意:此版本的所有临时修订版将在您购买时提供。手动和半自动金属锯切机UL 25651范围1。1本标准涵盖手动和半自动金属锯床，使用锯片（工具）切割或改变工件形状，用于工业或商业应用。机器为手动操作或能够执行一个手动驱动的切割操作循环。1.2本设备的安装应符合国家电气规范、ANSI/NFPA 70和工业机械电气标准、NFPA 79.1.3本类别中的机器不适用于处理危险品。 1.4某些设备的使用涉及与受伤风险相关的某些固有危险，这些危险无法通过实际设计特征完全消除。这些要求旨在将此类危险降低到可接受的水平。1.5本标准不包括:a）机器人和相关控制设备。该设备包含在机器人和机器人设备标准UL 1740中。b） UL 2011《工厂自动化设备调查大纲》涵盖了设计用于执行重复制造相关切割或锯切任务的自动化设备。c） 电线连接或永久连接的固定和轻工业工具，包含在固定和固定电动工具标准UL 987中。 1.6本标准涵盖的设备不适用于无人值守应用中的危险品处理。1.7除了符合本标准的要求外，手动和半自动金属锯床还应符合:a）机床标准——金属锯床的安全，ANSI B11。10;b） 工业机械电气标准NFPA 79；andc）固定式和固定式电动工具标准UL 987.1.8中的适用要求构成整体设备一部分的控制面板，无论是单独使用还是与金属锯切机一起使用，都应符合工业控制面板标准UL 508A中的要求。

Please note: All interim revisions for this edition available at time of your purchase will be included.Manual and Semiautomatic Metal Sawing MachinesUL 25651 Scope1.1 This standard covers manual and semi-automatic metal sawing machines that use a saw blade (tool) to cut off or change the shape of the work piece and are intended for use in industrial or commercial applications. Machines are manually operated or capable of performing one cutting cycle of operation, which is manually actuated.1.2 This equipment is intended to be installed in accordance with the National Electrical Code, ANSI/NFPA 70 and Electrical Standard for Industrial Machinery, NFPA 79.1.3 Machines included in this category are not intended for the handling of hazardous material.1.4 The use of some equipment involves certain inherent hazards related to the risk of injury that cannot be wholly eliminated by practical design features. These requirements are intended to reduce such hazards to an acceptable level.1.5 This standard does not cover:a) Robotics and associated control equipment. This equipment is covered by the Standard for Robots and Robotic Equipment, UL 1740.b) Automated equipment designed to perform repetitive manufacturing related cutting or sawing tasks, is covered by the Outline of Investigation for Factory Automation Equipment, UL 2011.c) Cord-connected or permanently-connected stationary and light industrial tools which are covered under Standard for Stationary and Fixed Electric Tools, UL 987.1.6 Devices covered by this standard are not intended for the handling of hazardous materials in unattended applications.1.7 In addition to complying with the requirements in this standard, manual and semi-automatic metal sawing machines shall also comply with:a) Standard for Machine Tools - Safety for Metal Sawing Machines, ANSI B11.10;b) Standard for Electrical Standard for Industrial Machinery, NFPA 79; andc) The applicable requirements in the Standard for Stationary and Fixed Electric Tools, UL 987.1.8 A control panel which forms a portion of the overall equipment, either alone or in conjunction with the metal sawing machine, shall comply with the requirements in the Standard for Industrial Control Panels, UL 508A.