1.1 本规范涵盖天然橡胶包（包上有橡胶包装板）上的包涂层，并包括试验方法说明。它规定了此类涂层的最大允许量。 1.2 本规范不适用于使用塑料包装的天然橡胶，因为未使用包涂层。 1.3 以下安全隐患警告仅适用于试验方法部分第节 5. ，本规范: 本标准并非旨在解决与其使用相关的所有安全问题（如有）。本标准的用户有责任在使用前制定适当的安全、健康和环境实践，并确定监管限制的适用性。 1.4 本国际标准是根据世界贸易组织技术性贸易壁垒（TBT）委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认标准化原则制定的。

1.1 This specification covers bale coating on bales of natural rubber (that have rubber wrapper sheets on the bales) and includes test method description. It specifies the maximum permissible amount of such coating. 1.2 This specification is not applicable to natural rubber that is packaged with plastic wrappers, as no bale coating is used. 1.3 The following safety hazards caveat pertains only to the test method portion, Section 5 , of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.